A laboratory records 24 measurements in 3 equal groups. Calculate the mean number per group and state any remainder.
IB Mathematics: AA and AI
Original CBE Nexus practice questions organised around the chapter sequence supplied for this resource. Each chapter contains 70 structured and extended-response exercises, five labelled visual figures and answer space.
Syllabus alignment notice: The 18 headings are a learning-resource organisation, not a verbatim official IB syllabus sequence. AA emphasises mathematical analysis, algebraic fluency and calculus; AI emphasises modelling, statistical reasoning, interpretation and technology-supported problem solving. Not every topic has equal coverage in all four courses. Internal assessment and communication chapters are practice for mathematical exploration and written reasoning, not separate external-exam syllabus units. Confirm depth against the guide for the student's course and examination session.
Curriculum transition: The IB states that the revised mathematics courses begin first teaching in August 2027 and first assessment in May 2029. For that revised course, the IB identifies important removals: bivariate data from both AA and AI; logarithms from AI SL; vector product, complex numbers and Poisson distribution from AI HL; and trapezoidal-rule area approximation from AI SL. Chapter 11 is therefore labelled transition/extension rather than assumed core for 2029 candidates. Use the correct guide for the examination session.
Chapter index
These are original practice materials, not official IB examination papers or endorsed IB material. Calculator/CAS instructions should be followed where the relevant course paper permits or requires technology.
1. Number and arithmetic
Scope: Number systems, indices, surds, logarithms where in the applicable guide, financial contexts for relevant course/assessment route. Course and level tags identify the intended emphasis; consult the relevant guide for route-specific depth. This chapter is not automatically common to every route.
Five fully worked IB-style problems — Chapter 1
Use these model solutions to practise clear mathematical communication. Show equivalent valid methods in your own working.
Worked problem 1. A water tank holds 2.4×10³ L. It is drained at 18 L/min. How long until 1.05×10³ L remains?
- Convert the quantities from standard form: 2.4×10³=2400 L and 1.05×10³=1050 L.
- Find the volume removed: 2400−1050=1350 L.
- Divide by the constant drainage rate: t=1350÷18=75 min. Answer: 75 minutes.
Worked problem 2. A medicine concentration falls from 80 mg/L to 10 mg/L by repeated halving. How many half-lives have elapsed?
- List the successive concentrations: 80, 40, 20, 10 mg/L.
- Count the halvings: 80→40 (1), 40→20 (2), 20→10 (3).
- There are 3 half-lives. If one half-life is 6 h, elapsed time=3×6=18 h. Answer: 3 half-lives, or 18 hours.
Worked problem 3. A length is measured as 12.6 cm to the nearest 0.1 cm. State the lower and upper bounds and the maximum absolute error.
- Rounding to the nearest 0.1 cm means the true value is within 0.05 cm of 12.6 cm.
- Lower bound=12.6−0.05=12.55 cm.
- Upper bound=12.6+0.05=12.65 cm, not included under the usual half-open interval convention.
- Maximum absolute error=0.05 cm. Answer: 12.55≤L<12.65 cm; error at most 0.05 cm.
Worked problem 4. Simplify (3.2×10⁵)(4×10⁻³) in standard form.
- Multiply the coefficients: 3.2×4=12.8.
- Add powers of ten when multiplying: 10⁵×10⁻³=10².
- Combine: 12.8×10².
- Standard form requires a coefficient from 1 inclusive to 10 exclusive: 12.8×10²=1.28×10³. Answer: 1.28×10³.
Worked problem 5. An account of $750 earns 4.8% compound interest annually for 3 years. Find the final balance.
- Use compound growth A=P(1+r)^n.
- Substitute P=750, r=0.048 and n=3: A=750(1.048)³.
- Evaluate 1.048³≈1.151? and multiply by 750.
- A≈$863.30 to the nearest cent. Answer: $863.30.
Mock questions — 70 questions
A laboratory records 36 measurements in 6 equal groups. Calculate the mean number per group and state any remainder.
A laboratory records 48 measurements in 9 equal groups. Calculate the mean number per group and state any remainder.
A laboratory records 60 measurements in 5 equal groups. Calculate the mean number per group and state any remainder.
A laboratory records 72 measurements in 8 equal groups. Calculate the mean number per group and state any remainder.
A laboratory records 84 measurements in 4 equal groups. Calculate the mean number per group and state any remainder.
A laboratory records 96 measurements in 7 equal groups. Calculate the mean number per group and state any remainder.
A laboratory records 108 measurements in 3 equal groups. Calculate the mean number per group and state any remainder.
A laboratory records 120 measurements in 6 equal groups. Calculate the mean number per group and state any remainder.
A laboratory records 24 measurements in 9 equal groups. Calculate the mean number per group and state any remainder.
Evaluate 5^3 ÷ 5 and express the result as an integer.
Evaluate 6^3 ÷ 6 and express the result as an integer.
Evaluate 7^3 ÷ 7 and express the result as an integer.
Evaluate 8^3 ÷ 8 and express the result as an integer.
Evaluate 9^3 ÷ 9 and express the result as an integer.
Evaluate 10^3 ÷ 10 and express the result as an integer.
Evaluate 11^3 ÷ 11 and express the result as an integer.
Evaluate 12^3 ÷ 12 and express the result as an integer.
Evaluate 4^3 ÷ 4 and express the result as an integer.
Evaluate 5^3 ÷ 5 and express the result as an integer.
Simplify √32 and give the answer in the form k√2.
Simplify √50 and give the answer in the form k√2.
Simplify √72 and give the answer in the form k√2.
Simplify √98 and give the answer in the form k√2.
Simplify √128 and give the answer in the form k√2.
Simplify √162 and give the answer in the form k√2.
Simplify √200 and give the answer in the form k√2.
Simplify √8 and give the answer in the form k√2.
Simplify √18 and give the answer in the form k√2.
Simplify √32 and give the answer in the form k√2.
A price of $50 is reduced by 35%. Calculate the sale price and the absolute reduction.
A price of $60 is reduced by 15%. Calculate the sale price and the absolute reduction.
A price of $70 is reduced by 30%. Calculate the sale price and the absolute reduction.
A price of $80 is reduced by 10%. Calculate the sale price and the absolute reduction.
A price of $90 is reduced by 25%. Calculate the sale price and the absolute reduction.
A price of $100 is reduced by 5%. Calculate the sale price and the absolute reduction.
A price of $20 is reduced by 20%. Calculate the sale price and the absolute reduction.
A price of $30 is reduced by 35%. Calculate the sale price and the absolute reduction.
A price of $40 is reduced by 15%. Calculate the sale price and the absolute reduction.
A price of $50 is reduced by 30%. Calculate the sale price and the absolute reduction.
A population rises from 6000 to 6200 in one year. Find the percentage increase.
A population rises from 7000 to 7500 in one year. Find the percentage increase.
A population rises from 8000 to 8100 in one year. Find the percentage increase.
A population rises from 9000 to 9400 in one year. Find the percentage increase.
A population rises from 10000 to 10700 in one year. Find the percentage increase.
A population rises from 2000 to 2300 in one year. Find the percentage increase.
A population rises from 3000 to 3600 in one year. Find the percentage increase.
A population rises from 4000 to 4200 in one year. Find the percentage increase.
A population rises from 5000 to 5500 in one year. Find the percentage increase.
A population rises from 6000 to 6100 in one year. Find the percentage increase.
Express 704 in standard form, then calculate its reciprocal to 3 significant figures.
Express 807 in standard form, then calculate its reciprocal to 3 significant figures.
Express 903 in standard form, then calculate its reciprocal to 3 significant figures.
Express 1006 in standard form, then calculate its reciprocal to 3 significant figures.
Express 202 in standard form, then calculate its reciprocal to 3 significant figures.
Express 305 in standard form, then calculate its reciprocal to 3 significant figures.
Express 401 in standard form, then calculate its reciprocal to 3 significant figures.
Express 504 in standard form, then calculate its reciprocal to 3 significant figures.
Express 607 in standard form, then calculate its reciprocal to 3 significant figures.
Express 703 in standard form, then calculate its reciprocal to 3 significant figures.
A currency amount of 800 units is exchanged at 1 unit = 0.6 dollars. Find the value and explain the units.
A currency amount of 900 units is exchanged at 1 unit = 0.2 dollars. Find the value and explain the units.
A currency amount of 1000 units is exchanged at 1 unit = 0.5 dollars. Find the value and explain the units.
A currency amount of 200 units is exchanged at 1 unit = 0.1 dollars. Find the value and explain the units.
A currency amount of 300 units is exchanged at 1 unit = 0.4 dollars. Find the value and explain the units.
A currency amount of 400 units is exchanged at 1 unit = 0.7 dollars. Find the value and explain the units.
A currency amount of 500 units is exchanged at 1 unit = 0.3 dollars. Find the value and explain the units.
A currency amount of 600 units is exchanged at 1 unit = 0.6 dollars. Find the value and explain the units.
A currency amount of 700 units is exchanged at 1 unit = 0.2 dollars. Find the value and explain the units.
A currency amount of 800 units is exchanged at 1 unit = 0.5 dollars. Find the value and explain the units.
2. Sequences and series
Scope: Arithmetic and geometric sequences, sigma notation, convergence and series applications. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 2
Use these model solutions to practise clear mathematical communication. Show equivalent valid methods in your own working.
Worked problem 1. An arithmetic sequence has u₃=11 and u₉=35. Find u₁, d and S₂₀.
- Use uₙ=a+(n−1)d. Then u₃=a+2d=11 and u₉=a+8d=35.
- Subtract: 6d=24, so d=4.
- Substitute into a+2d=11: a+8=11, hence a=3.
- Use Sₙ=n/2[2a+(n−1)d]. S₂₀=10[6+76]=820. Answer: u₁=3, d=4, S₂₀=820.
Worked problem 2. A geometric sequence has u₂=12 and u₅=324, with positive common ratio. Find r and u₁.
- Use uₙ=arⁿ⁻¹. Thus u₂=ar=12 and u₅=ar⁴=324.
- Divide the equations: r³=324/12=27.
- Since r is positive, r=3.
- From ar=12, a=12/3=4. Answer: common ratio 3 and first term 4.
Worked problem 3. Find the sum to infinity of 18−12+8−…
- Identify first term a=18 and common ratio r=−12/18=−2/3.
- Check convergence: |r|=2/3<1, so a sum to infinity exists.
- Apply S∞=a/(1−r).
- S∞=18/[1−(−2/3)]=18/(5/3)=54/5=10.8. Answer: 10.8.
Worked problem 4. The 4th term of an arithmetic sequence is 17 and the 12th is 49. Find the 30th term.
- Use uₙ=a+(n−1)d. Given a+3d=17 and a+11d=49.
- Subtract: 8d=32, so d=4.
- Find a: a+12=17, hence a=5.
- u₃₀=5+29(4)=121. Answer: 121.
Worked problem 5. A ball rebounds to 70% of its previous height after each bounce. It is dropped from 2.5 m. Find the total vertical distance travelled before coming to rest.
- The initial drop is 2.5 m.
- The first rebound height is 0.70×2.5=1.75 m.
- Rebound heights form a geometric series with a=1.75 and r=0.70.
- Total distance includes the first drop plus twice every rebound height (up and down): D=2.5+2[1.75/(1−0.70)].
- D=2.5+2(5.8333…)=14.1666… m. Answer: approximately 14.2 m.
Mock questions — 70 questions
An arithmetic sequence has first term 2 and common difference 1. Find T₁₅ and S₁₅.
An arithmetic sequence has first term 3 and common difference 4. Find T₁₅ and S₁₅.
An arithmetic sequence has first term 4 and common difference 7. Find T₁₅ and S₁₅.
An arithmetic sequence has first term 5 and common difference 3. Find T₁₅ and S₁₅.
An arithmetic sequence has first term 6 and common difference 6. Find T₁₅ and S₁₅.
An arithmetic sequence has first term 7 and common difference 2. Find T₁₅ and S₁₅.
An arithmetic sequence has first term 8 and common difference 5. Find T₁₅ and S₁₅.
An arithmetic sequence has first term 9 and common difference 1. Find T₁₅ and S₁₅.
An arithmetic sequence has first term 10 and common difference 4. Find T₁₅ and S₁₅.
An arithmetic sequence has first term 2 and common difference 7. Find T₁₅ and S₁₅.
A geometric sequence begins 3, 9, … . Find the common ratio and the 8th term.
A geometric sequence begins 4, 24, … . Find the common ratio and the 8th term.
A geometric sequence begins 5, 10, … . Find the common ratio and the 8th term.
A geometric sequence begins 6, 30, … . Find the common ratio and the 8th term.
A geometric sequence begins 7, 7, … . Find the common ratio and the 8th term.
A geometric sequence begins 8, 32, … . Find the common ratio and the 8th term.
A geometric sequence begins 9, 63, … . Find the common ratio and the 8th term.
A geometric sequence begins 10, 30, … . Find the common ratio and the 8th term.
A geometric sequence begins 2, 12, … . Find the common ratio and the 8th term.
A geometric sequence begins 3, 6, … . Find the common ratio and the 8th term.
The 4th term of an arithmetic sequence is 12 and the 9th is 32. Find the first term and common difference.
The 4th term of an arithmetic sequence is 15 and the 9th is 40. Find the first term and common difference.
The 4th term of an arithmetic sequence is 18 and the 9th is 48. Find the first term and common difference.
The 4th term of an arithmetic sequence is 21 and the 9th is 56. Find the first term and common difference.
The 4th term of an arithmetic sequence is 24 and the 9th is 64. Find the first term and common difference.
The 4th term of an arithmetic sequence is 27 and the 9th is 72. Find the first term and common difference.
The 4th term of an arithmetic sequence is 30 and the 9th is 80. Find the first term and common difference.
The 4th term of an arithmetic sequence is 6 and the 9th is 16. Find the first term and common difference.
The 4th term of an arithmetic sequence is 9 and the 9th is 24. Find the first term and common difference.
The 4th term of an arithmetic sequence is 12 and the 9th is 32. Find the first term and common difference.
A geometric series has a=10 and r=0.5. Find S₆ exactly.
A geometric series has a=12 and r=0.5. Find S₆ exactly.
A geometric series has a=14 and r=0.5. Find S₆ exactly.
A geometric series has a=16 and r=0.5. Find S₆ exactly.
A geometric series has a=18 and r=0.5. Find S₆ exactly.
A geometric series has a=20 and r=0.5. Find S₆ exactly.
A geometric series has a=4 and r=0.5. Find S₆ exactly.
A geometric series has a=6 and r=0.5. Find S₆ exactly.
A geometric series has a=8 and r=0.5. Find S₆ exactly.
A geometric series has a=10 and r=0.5. Find S₆ exactly.
For uₙ=6n²−2n, calculate u₄ and u₁₀, then find u₁₀−u₄.
For uₙ=7n²−5n, calculate u₄ and u₁₀, then find u₁₀−u₄.
For uₙ=8n²−1n, calculate u₄ and u₁₀, then find u₁₀−u₄.
For uₙ=9n²−4n, calculate u₄ and u₁₀, then find u₁₀−u₄.
For uₙ=10n²−7n, calculate u₄ and u₁₀, then find u₁₀−u₄.
For uₙ=2n²−3n, calculate u₄ and u₁₀, then find u₁₀−u₄.
For uₙ=3n²−6n, calculate u₄ and u₁₀, then find u₁₀−u₄.
For uₙ=4n²−2n, calculate u₄ and u₁₀, then find u₁₀−u₄.
For uₙ=5n²−5n, calculate u₄ and u₁₀, then find u₁₀−u₄.
For uₙ=6n²−1n, calculate u₄ and u₁₀, then find u₁₀−u₄.
A sequence has Sₙ=7n²+4n. Derive an expression for its nth term.
A sequence has Sₙ=8n²+7n. Derive an expression for its nth term.
A sequence has Sₙ=9n²+3n. Derive an expression for its nth term.
A sequence has Sₙ=10n²+6n. Derive an expression for its nth term.
A sequence has Sₙ=2n²+2n. Derive an expression for its nth term.
A sequence has Sₙ=3n²+5n. Derive an expression for its nth term.
A sequence has Sₙ=4n²+1n. Derive an expression for its nth term.
A sequence has Sₙ=5n²+4n. Derive an expression for its nth term.
A sequence has Sₙ=6n²+7n. Derive an expression for its nth term.
A sequence has Sₙ=7n²+3n. Derive an expression for its nth term.
A ball rebounds to 60% of its previous height from 80 m. Find the total vertical distance travelled to infinity, assuming the rebound ratio is constant.
A ball rebounds to 20% of its previous height from 90 m. Find the total vertical distance travelled to infinity, assuming the rebound ratio is constant.
A ball rebounds to 50% of its previous height from 100 m. Find the total vertical distance travelled to infinity, assuming the rebound ratio is constant.
A ball rebounds to 10% of its previous height from 20 m. Find the total vertical distance travelled to infinity, assuming the rebound ratio is constant.
A ball rebounds to 40% of its previous height from 30 m. Find the total vertical distance travelled to infinity, assuming the rebound ratio is constant.
A ball rebounds to 70% of its previous height from 40 m. Find the total vertical distance travelled to infinity, assuming the rebound ratio is constant.
A ball rebounds to 30% of its previous height from 50 m. Find the total vertical distance travelled to infinity, assuming the rebound ratio is constant.
A ball rebounds to 60% of its previous height from 60 m. Find the total vertical distance travelled to infinity, assuming the rebound ratio is constant.
A ball rebounds to 20% of its previous height from 70 m. Find the total vertical distance travelled to infinity, assuming the rebound ratio is constant.
A ball rebounds to 50% of its previous height from 80 m. Find the total vertical distance travelled to infinity, assuming the rebound ratio is constant.
3. Algebra and algebraic reasoning
Scope: Expansion, factorisation, identities, rational expressions, proof and algebraic manipulation. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 3
Use these model solutions to practise clear mathematical communication. Show equivalent valid methods in your own working.
Worked problem 1. Factorise 2x²−7x+3 and hence solve 2x²−7x+3=0.
- Find two numbers whose product is 2×3=6 and whose sum is −7: −1 and −6.
- Split the middle term: 2x²−x−6x+3.
- Factor by grouping: x(2x−1)−3(2x−1)=(2x−1)(x−3).
- Set each factor to zero: 2x−1=0 or x−3=0. Answer: x=1/2 or x=3.
Worked problem 2. Simplify (x²−9)/(x²+5x+6), stating excluded values.
- Factor the numerator: x²−9=(x−3)(x+3).
- Factor the denominator: x²+5x+6=(x+2)(x+3).
- Cancel the common factor x+3 to obtain (x−3)/(x+2).
- Restrictions come from the original denominator: x≠−2 and x≠−3. Answer: (x−3)/(x+2), x≠−2,−3.
Worked problem 3. Given p(x)=x³−4x²−x+4, show that x=1 is a root and factorise fully.
- Substitute x=1: p(1)=1−4−1+4=0, so the factor theorem confirms (x−1) is a factor.
- Divide x³−4x²−x+4 by x−1; the quotient is x²−3x−4.
- Factor the quotient: x²−3x−4=(x−4)(x+1).
- Combine the factors. Answer: p(x)=(x−1)(x−4)(x+1).
Worked problem 4. Solve 3/(x−1)−2/(x+1)=1, stating restrictions.
- State restrictions from denominators: x≠1 and x≠−1.
- Multiply every term by (x−1)(x+1): 3(x+1)−2(x−1)=x²−1.
- Expand: 3x+3−2x+2=x²−1, so x+5=x²−1.
- Rearrange: x²−x−6=0? Check: x²−x−6=0, hence (x−3)(x+2)=0.
- Solutions are x=3 or x=−2; neither violates the restrictions. Answer: x=3 or x=−2.
Worked problem 5. Show that (a+b)²−(a−b)²=4ab, then evaluate it for a=7/2 and b=3.
- Expand the first square: (a+b)²=a²+2ab+b².
- Expand the second: (a−b)²=a²−2ab+b².
- Subtract: a²+2ab+b²−a²+2ab−b²=4ab.
- Substitute a=7/2 and b=3: 4ab=4×(7/2)×3=42. Answer: identity is proved and the value is 42.
Mock questions — 70 questions
Expand and simplify (x+2)(2x−1)−(x−1)².
Expand and simplify (x+3)(2x−4)−(x−4)².
Expand and simplify (x+4)(2x−7)−(x−7)².
Expand and simplify (x+5)(2x−3)−(x−3)².
Expand and simplify (x+6)(2x−6)−(x−6)².
Expand and simplify (x+7)(2x−2)−(x−2)².
Expand and simplify (x+8)(2x−5)−(x−5)².
Expand and simplify (x+9)(2x−1)−(x−1)².
Expand and simplify (x+10)(2x−4)−(x−4)².
Expand and simplify (x+2)(2x−7)−(x−7)².
Factorise 3x²+12x+9.
Factorise 4x²+28x+24.
Factorise 5x²+15x+10.
Factorise 6x²+36x+30.
Factorise 7x²+14x+7.
Factorise 8x²+40x+32.
Factorise 9x²+72x+63.
Factorise 10x²+40x+30.
Factorise 2x²+14x+12.
Factorise 3x²+9x+6.
Simplify (x²−16)/(x−4) and state the excluded value.
Simplify (x²−25)/(x−5) and state the excluded value.
Simplify (x²−36)/(x−6) and state the excluded value.
Simplify (x²−49)/(x−7) and state the excluded value.
Simplify (x²−64)/(x−8) and state the excluded value.
Simplify (x²−81)/(x−9) and state the excluded value.
Simplify (x²−100)/(x−10) and state the excluded value.
Simplify (x²−4)/(x−2) and state the excluded value.
Simplify (x²−9)/(x−3) and state the excluded value.
Simplify (x²−16)/(x−4) and state the excluded value.
Given (x+5)²=49, solve for x and check both roots.
Given (x+6)²=9, solve for x and check both roots.
Given (x+7)²=36, solve for x and check both roots.
Given (x+8)²=4, solve for x and check both roots.
Given (x+9)²=25, solve for x and check both roots.
Given (x+10)²=1, solve for x and check both roots.
Given (x+2)²=16, solve for x and check both roots.
Given (x+3)²=49, solve for x and check both roots.
Given (x+4)²=9, solve for x and check both roots.
Given (x+5)²=36, solve for x and check both roots.
Show algebraically that (n+6)²−n² is divisible by n, or state the exact simplified expression and identify when it is an integer.
Show algebraically that (n+7)²−n² is divisible by n, or state the exact simplified expression and identify when it is an integer.
Show algebraically that (n+8)²−n² is divisible by n, or state the exact simplified expression and identify when it is an integer.
Show algebraically that (n+9)²−n² is divisible by n, or state the exact simplified expression and identify when it is an integer.
Show algebraically that (n+10)²−n² is divisible by n, or state the exact simplified expression and identify when it is an integer.
Show algebraically that (n+2)²−n² is divisible by n, or state the exact simplified expression and identify when it is an integer.
Show algebraically that (n+3)²−n² is divisible by n, or state the exact simplified expression and identify when it is an integer.
Show algebraically that (n+4)²−n² is divisible by n, or state the exact simplified expression and identify when it is an integer.
Show algebraically that (n+5)²−n² is divisible by n, or state the exact simplified expression and identify when it is an integer.
Show algebraically that (n+6)²−n² is divisible by n, or state the exact simplified expression and identify when it is an integer.
Make x the subject of y=(7x−4)/(11+x).
Make x the subject of y=(8x−7)/(5+x).
Make x the subject of y=(9x−3)/(10+x).
Make x the subject of y=(10x−6)/(4+x).
Make x the subject of y=(2x−2)/(9+x).
Make x the subject of y=(3x−5)/(3+x).
Make x the subject of y=(4x−1)/(8+x).
Make x the subject of y=(5x−4)/(13+x).
Make x the subject of y=(6x−7)/(7+x).
Make x the subject of y=(7x−3)/(12+x).
Use the identity (u+v)²=u²+2uv+v² to evaluate 64+2(8)(6)+36 without direct expansion.
Use the identity (u+v)²=u²+2uv+v² to evaluate 81+2(9)(2)+4 without direct expansion.
Use the identity (u+v)²=u²+2uv+v² to evaluate 100+2(10)(5)+25 without direct expansion.
Use the identity (u+v)²=u²+2uv+v² to evaluate 4+2(2)(1)+1 without direct expansion.
Use the identity (u+v)²=u²+2uv+v² to evaluate 9+2(3)(4)+16 without direct expansion.
Use the identity (u+v)²=u²+2uv+v² to evaluate 16+2(4)(7)+49 without direct expansion.
Use the identity (u+v)²=u²+2uv+v² to evaluate 25+2(5)(3)+9 without direct expansion.
Use the identity (u+v)²=u²+2uv+v² to evaluate 36+2(6)(6)+36 without direct expansion.
Use the identity (u+v)²=u²+2uv+v² to evaluate 49+2(7)(2)+4 without direct expansion.
Use the identity (u+v)²=u²+2uv+v² to evaluate 64+2(8)(5)+25 without direct expansion.
4. Equations, inequalities and systems
Scope: Linear, quadratic, exponential, trigonometric and simultaneous equations; inequalities and feasible regions. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 4
Use these model solutions to practise clear mathematical communication. Show equivalent valid methods in your own working.
Worked problem 1. Solve x²−5x+6<0 and express the solution as an interval.
- Solve x²−5x+6=0 to find the boundary points: (x−2)(x−3)=0, so x=2 or x=3.
- The leading coefficient is positive, so the parabola opens upwards.
- An upward-opening quadratic is below the x-axis between its two distinct roots.
- The inequality is strict, so endpoints are excluded. Answer: 2
Worked problem 2. Solve simultaneously 2x+3y=13 and 3x−y=3.
- Rearrange the second equation 3x−y=3 to y=3x−3.
- Substitute into 2x+3y=13: 2x+3(3x−3)=13.
- Expand and solve: 2x+9x−9=13 ⇒11x=22 ⇒x=2.
- Substitute back: y=3(2)−3=3. Answer: (x,y)=(2,3).
Worked problem 3. A rectangle has perimeter 34 cm and area 60 cm². Find its side lengths.
- Let the sides be x and y. From perimeter 34, 2x+2y=34, hence x+y=17.
- Area gives xy=60.
- The side lengths are roots of t²−17t+60=0.
- Factor: (t−5)(t−12)=0. Answer: the sides are 5 cm and 12 cm.
Worked problem 4. Solve |2x−5|=7.
- By the definition of absolute value, |2x−5|=7 gives two cases.
- Case 1: 2x−5=7, so 2x=12 and x=6.
- Case 2: 2x−5=−7, so 2x=−2 and x=−1.
- Both satisfy the original equation. Answer: x=−1 or x=6.
Worked problem 5. A ticket costs $x and a pass costs $(x+8). Two tickets and three passes cost $76. Find each price.
- Let the ticket price be x dollars; then the pass costs x+8.
- Form the total-cost equation: 2x+3(x+8)=76.
- Expand: 2x+3x+24=76, so 5x=52 and x=10.40.
- Pass price=10.40+8=$18.40. Answer: ticket $10.40; pass $18.40.
Mock questions — 70 questions
Solve 2x²−3x−2=0 exactly.
Solve 3x²−7x−12=0 exactly.
Solve 4x²−11x−28=0 exactly.
Solve 5x²−8x−15=0 exactly.
Solve 6x²−12x−36=0 exactly.
Solve 7x²−9x−14=0 exactly.
Solve 8x²−13x−40=0 exactly.
Solve 9x²−10x−9=0 exactly.
Solve 10x²−14x−40=0 exactly.
Solve 2x²−9x−14=0 exactly.
Solve the simultaneous equations 3x+3y=18 and x−y=7.
Solve the simultaneous equations 4x+6y=28 and x−y=1.
Solve the simultaneous equations 5x+2y=24 and x−y=6.
Solve the simultaneous equations 6x+5y=34 and x−y=11.
Solve the simultaneous equations 7x+1y=30 and x−y=5.
Solve the simultaneous equations 8x+4y=40 and x−y=10.
Solve the simultaneous equations 9x+7y=50 and x−y=4.
Solve the simultaneous equations 10x+3y=46 and x−y=9.
Solve the simultaneous equations 2x+6y=20 and x−y=3.
Solve the simultaneous equations 3x+2y=16 and x−y=8.
Solve the inequality 4x−5≤20 and represent the solution on a number line.
Solve the inequality 5x−1≤25 and represent the solution on a number line.
Solve the inequality 6x−4≤30 and represent the solution on a number line.
Solve the inequality 7x−7≤35 and represent the solution on a number line.
Solve the inequality 8x−3≤40 and represent the solution on a number line.
Solve the inequality 9x−6≤45 and represent the solution on a number line.
Solve the inequality 10x−2≤50 and represent the solution on a number line.
Solve the inequality 2x−5≤10 and represent the solution on a number line.
Solve the inequality 3x−1≤15 and represent the solution on a number line.
Solve the inequality 4x−4≤20 and represent the solution on a number line.
Find the intersection points of y=x²−5x and y=7x−10.
Find the intersection points of y=x²−6x and y=3x−4.
Find the intersection points of y=x²−7x and y=6x−9.
Find the intersection points of y=x²−8x and y=2x−3.
Find the intersection points of y=x²−9x and y=5x−8.
Find the intersection points of y=x²−10x and y=1x−13.
Find the intersection points of y=x²−2x and y=4x−7.
Find the intersection points of y=x²−3x and y=7x−12.
Find the intersection points of y=x²−4x and y=3x−6.
Find the intersection points of y=x²−5x and y=6x−11.
A system has x+y=18 and 2x−y=2. Find x and y, then verify both equations.
A system has x+y=21 and 2x−y=5. Find x and y, then verify both equations.
A system has x+y=24 and 2x−y=1. Find x and y, then verify both equations.
A system has x+y=27 and 2x−y=4. Find x and y, then verify both equations.
A system has x+y=30 and 2x−y=7. Find x and y, then verify both equations.
A system has x+y=6 and 2x−y=3. Find x and y, then verify both equations.
A system has x+y=9 and 2x−y=6. Find x and y, then verify both equations.
A system has x+y=12 and 2x−y=2. Find x and y, then verify both equations.
A system has x+y=15 and 2x−y=5. Find x and y, then verify both equations.
A system has x+y=18 and 2x−y=1. Find x and y, then verify both equations.
Solve |7x−4|=22, giving both solutions.
Solve |8x−7|=10, giving both solutions.
Solve |9x−3|=20, giving both solutions.
Solve |10x−6|=8, giving both solutions.
Solve |2x−2|=18, giving both solutions.
Solve |3x−5|=6, giving both solutions.
Solve |4x−1|=16, giving both solutions.
Solve |5x−4|=26, giving both solutions.
Solve |6x−7|=14, giving both solutions.
Solve |7x−3|=24, giving both solutions.
For y=8x+6 and y=−x+24, find the intersection and interpret it as the solution of a system.
For y=9x+2 and y=−x+44, find the intersection and interpret it as the solution of a system.
For y=10x+5 and y=−x+20, find the intersection and interpret it as the solution of a system.
For y=2x+1 and y=−x+40, find the intersection and interpret it as the solution of a system.
For y=3x+4 and y=−x+16, find the intersection and interpret it as the solution of a system.
For y=4x+7 and y=−x+36, find the intersection and interpret it as the solution of a system.
For y=5x+3 and y=−x+12, find the intersection and interpret it as the solution of a system.
For y=6x+6 and y=−x+32, find the intersection and interpret it as the solution of a system.
For y=7x+2 and y=−x+52, find the intersection and interpret it as the solution of a system.
For y=8x+5 and y=−x+28, find the intersection and interpret it as the solution of a system.
5. Functions, graphs and modelling
Scope: Domain, range, transformations, inverse/composite functions, intersections and model interpretation. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 5
Use these model solutions to practise clear mathematical communication. Show equivalent valid methods in your own working.
Worked problem 1. For f(x)=x²−6x+5, find the vertex, roots and range.
- Complete the square: x²−6x+5=(x−3)²−9+5=(x−3)²−4.
- The vertex form gives vertex (3,−4).
- For roots, set x²−6x+5=0=(x−1)(x−5), so x=1 or 5.
- The parabola opens upwards, so its minimum y-value is −4. Answer: vertex (3,−4), roots 1 and 5, range y≥−4.
Worked problem 2. The line through (−2,7) and (4,−5) is written y=mx+c. Find m,c and its x-intercept.
- Calculate gradient: m=(−5−7)/(4−(−2))=−12/6=−2.
- Use y=mx+c and point (−2,7): 7=−2(−2)+c, so c=3.
- The line is y=−2x+3.
- At the x-intercept y=0: 0=−2x+3, giving x=3/2. Answer: m=−2, c=3, x-intercept (3/2,0).
Worked problem 3. A function is f(x)=2(x−1)²−8. State the transformations of y=x² and find its zeros.
- Compare f(x)=2(x−1)²−8 with y=x²: translate 1 unit right, stretch vertically by factor 2, then translate 8 units down.
- Set f(x)=0: 2(x−1)²−8=0.
- Add 8 and divide by 2: (x−1)²=4.
- Take both square roots: x−1=±2. Answer: zeros x=−1 and x=3.
Worked problem 4. A model h(t)=−5t²+20t+1 gives height in metres. Find the time and height at the maximum.
- For h(t)=−5t²+20t+1, the vertex occurs at t=−b/(2a).
- Substitute a=−5 and b=20: t=−20/[2(−5)]=2 s.
- Evaluate the height: h(2)=−5(4)+20(2)+1=−20+40+1=21.
- Since a<0, the parabola opens downwards, so this is a maximum. Answer: maximum height 21 m at 2 s.
Worked problem 5. Given f(x)=3x−2 and g(x)=x²+1, find f∘g and g∘f, then evaluate each at x=2.
- For f∘g, substitute g(x)=x²+1 into f: f(g(x))=3(x²+1)−2.
- Simplify: 3x²+1. At x=2 this is 3(4)+1=13.
- For g∘f, substitute f(x)=3x−2 into g: g(f(x))=(3x−2)²+1.
- At x=2, f(2)=4 and g(4)=17. Answer: f∘g=3x²+1, value 13; g∘f=(3x−2)²+1, value 17.
Mock questions — 70 questions
For f(x)=x²−4x+1, find the turning point, axis of symmetry and range.
For f(x)=x²−6x+4, find the turning point, axis of symmetry and range.
For f(x)=x²−8x+7, find the turning point, axis of symmetry and range.
For f(x)=x²−10x+3, find the turning point, axis of symmetry and range.
For f(x)=x²−12x+6, find the turning point, axis of symmetry and range.
For f(x)=x²−14x+2, find the turning point, axis of symmetry and range.
For f(x)=x²−16x+5, find the turning point, axis of symmetry and range.
For f(x)=x²−18x+1, find the turning point, axis of symmetry and range.
For f(x)=x²−20x+4, find the turning point, axis of symmetry and range.
For f(x)=x²−4x+7, find the turning point, axis of symmetry and range.
Given f(x)=3x−3 and g(x)=x²+9, find f(g(2)) and g(f(2)).
Given f(x)=4x−6 and g(x)=x²+3, find f(g(2)) and g(f(2)).
Given f(x)=5x−2 and g(x)=x²+8, find f(g(2)) and g(f(2)).
Given f(x)=6x−5 and g(x)=x²+13, find f(g(2)) and g(f(2)).
Given f(x)=7x−1 and g(x)=x²+7, find f(g(2)) and g(f(2)).
Given f(x)=8x−4 and g(x)=x²+12, find f(g(2)) and g(f(2)).
Given f(x)=9x−7 and g(x)=x²+6, find f(g(2)) and g(f(2)).
Given f(x)=10x−3 and g(x)=x²+11, find f(g(2)) and g(f(2)).
Given f(x)=2x−6 and g(x)=x²+5, find f(g(2)) and g(f(2)).
Given f(x)=3x−2 and g(x)=x²+10, find f(g(2)) and g(f(2)).
Find the inverse of f(x)=(4x+5)/4, stating its domain and range.
Find the inverse of f(x)=(5x+1)/9, stating its domain and range.
Find the inverse of f(x)=(6x+4)/3, stating its domain and range.
Find the inverse of f(x)=(7x+7)/8, stating its domain and range.
Find the inverse of f(x)=(8x+3)/13, stating its domain and range.
Find the inverse of f(x)=(9x+6)/7, stating its domain and range.
Find the inverse of f(x)=(10x+2)/12, stating its domain and range.
Find the inverse of f(x)=(2x+5)/6, stating its domain and range.
Find the inverse of f(x)=(3x+1)/11, stating its domain and range.
Find the inverse of f(x)=(4x+4)/5, stating its domain and range.
A model h(t)=5t²−28t+100 describes height. Find its minimum/maximum and the time it occurs.
A model h(t)=6t²−12t+40 describes height. Find its minimum/maximum and the time it occurs.
A model h(t)=7t²−24t+90 describes height. Find its minimum/maximum and the time it occurs.
A model h(t)=8t²−8t+30 describes height. Find its minimum/maximum and the time it occurs.
A model h(t)=9t²−20t+80 describes height. Find its minimum/maximum and the time it occurs.
A model h(t)=10t²−4t+130 describes height. Find its minimum/maximum and the time it occurs.
A model h(t)=2t²−16t+70 describes height. Find its minimum/maximum and the time it occurs.
A model h(t)=3t²−28t+120 describes height. Find its minimum/maximum and the time it occurs.
A model h(t)=4t²−12t+60 describes height. Find its minimum/maximum and the time it occurs.
A model h(t)=5t²−24t+110 describes height. Find its minimum/maximum and the time it occurs.
Find the x-intercepts of y=(x−6)(x+2) and state the y-intercept.
Find the x-intercepts of y=(x−7)(x+5) and state the y-intercept.
Find the x-intercepts of y=(x−8)(x+1) and state the y-intercept.
Find the x-intercepts of y=(x−9)(x+4) and state the y-intercept.
Find the x-intercepts of y=(x−10)(x+7) and state the y-intercept.
Find the x-intercepts of y=(x−2)(x+3) and state the y-intercept.
Find the x-intercepts of y=(x−3)(x+6) and state the y-intercept.
Find the x-intercepts of y=(x−4)(x+2) and state the y-intercept.
Find the x-intercepts of y=(x−5)(x+5) and state the y-intercept.
Find the x-intercepts of y=(x−6)(x+1) and state the y-intercept.
The graph y=f(x) is translated 7 units right and 4 units up. Write the transformed equation when f(x)=x²−11.
The graph y=f(x) is translated 8 units right and 7 units up. Write the transformed equation when f(x)=x²−5.
The graph y=f(x) is translated 9 units right and 3 units up. Write the transformed equation when f(x)=x²−10.
The graph y=f(x) is translated 10 units right and 6 units up. Write the transformed equation when f(x)=x²−4.
The graph y=f(x) is translated 2 units right and 2 units up. Write the transformed equation when f(x)=x²−9.
The graph y=f(x) is translated 3 units right and 5 units up. Write the transformed equation when f(x)=x²−3.
The graph y=f(x) is translated 4 units right and 1 units up. Write the transformed equation when f(x)=x²−8.
The graph y=f(x) is translated 5 units right and 4 units up. Write the transformed equation when f(x)=x²−13.
The graph y=f(x) is translated 6 units right and 7 units up. Write the transformed equation when f(x)=x²−7.
The graph y=f(x) is translated 7 units right and 3 units up. Write the transformed equation when f(x)=x²−12.
A linear model passes through (8,6) and (6,14). Find its equation and predict y when x=10.
A linear model passes through (9,2) and (11,20). Find its equation and predict y when x=6.
A linear model passes through (10,5) and (5,15). Find its equation and predict y when x=9.
A linear model passes through (2,1) and (10,12). Find its equation and predict y when x=5.
A linear model passes through (3,4) and (4,7). Find its equation and predict y when x=8.
A linear model passes through (4,7) and (9,13). Find its equation and predict y when x=11.
A linear model passes through (5,3) and (3,8). Find its equation and predict y when x=7.
A linear model passes through (6,6) and (8,14). Find its equation and predict y when x=10.
A linear model passes through (7,2) and (13,20). Find its equation and predict y when x=6.
A linear model passes through (8,5) and (7,15). Find its equation and predict y when x=9.
6. Exponential and logarithmic functions
Scope: Growth, decay, compound change, logarithmic scales and solving exponential models; respect course/level scope. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 6
Use these model solutions to practise clear mathematical communication. Show equivalent valid methods in your own working.
Worked problem 1. A population follows P(t)=500(1.06)^t. Find P(8), to the nearest whole organism.
- Use the exponential growth model P(t)=P₀(1+r)^t. Here P₀=500 and r=0.06.
- Substitute t=8: P(8)=500(1.06)^8.
- Evaluate the power and multiply: P(8)≈796.9.
- Round to the nearest whole organism. Answer: approximately 797 organisms.
Worked problem 2. Solve 3^(2x−1)=81.
- Express 81 as a power of 3: 81=3⁴.
- Since the bases are equal, equate exponents: 2x−1=4.
- Solve: 2x=5, so x=5/2=2.5. Answer: x=2.5.
Worked problem 3. A radioactive sample has half-life 12 years. What fraction remains after 45 years?
- The half-life model gives remaining fraction (1/2)^(t/12).
- Substitute t=45: fraction=(1/2)^(45/12)=(1/2)^3.75.
- Evaluate: fraction≈0.0743.
- Convert to a percentage: 0.0743×100≈7.43%. Answer: approximately 0.0743 of the original sample, or 7.43%.
Worked problem 4. Solve log₂(x−1)+log₂(x+1)=3, stating the domain.
- Domain restrictions require x−1>0 and x+1>0; together x>1.
- Use log laws: log₂[(x−1)(x+1)]=3.
- Simplify: log₂(x²−1)=3, hence x²−1=2³=8.
- x²=9, so x=±3.
- Apply x>1 and reject −3. Answer: x=3.
Worked problem 5. An investment grows from $1200 to $1500 in 5 years with annual compound growth. Find the annual percentage rate.
- Use A=P(1+r)^n: 1500=1200(1+r)^5.
- Divide by 1200: (1+r)^5=1.25.
- Take the fifth root: 1+r=1.25^(1/5).
- r=1.25^(1/5)−1≈0.04564.
- Convert to a percentage. Answer: approximately 4.56% per annum.
Mock questions — 70 questions
A culture starts with 200 cells and doubles every 1 hours. Find the population after 3 hours.
A culture starts with 300 cells and doubles every 4 hours. Find the population after 12 hours.
A culture starts with 400 cells and doubles every 7 hours. Find the population after 21 hours.
A culture starts with 500 cells and doubles every 3 hours. Find the population after 9 hours.
A culture starts with 600 cells and doubles every 6 hours. Find the population after 18 hours.
A culture starts with 700 cells and doubles every 2 hours. Find the population after 6 hours.
A culture starts with 800 cells and doubles every 5 hours. Find the population after 15 hours.
A culture starts with 900 cells and doubles every 1 hours. Find the population after 3 hours.
A culture starts with 1000 cells and doubles every 4 hours. Find the population after 12 hours.
A culture starts with 200 cells and doubles every 7 hours. Find the population after 21 hours.
A machine worth $3000 depreciates by 15% each year. Find its value after 4 years.
A machine worth $4000 depreciates by 30% each year. Find its value after 4 years.
A machine worth $5000 depreciates by 10% each year. Find its value after 4 years.
A machine worth $6000 depreciates by 25% each year. Find its value after 4 years.
A machine worth $7000 depreciates by 5% each year. Find its value after 4 years.
A machine worth $8000 depreciates by 20% each year. Find its value after 4 years.
A machine worth $9000 depreciates by 35% each year. Find its value after 4 years.
A machine worth $10000 depreciates by 15% each year. Find its value after 4 years.
A machine worth $2000 depreciates by 30% each year. Find its value after 4 years.
A machine worth $3000 depreciates by 10% each year. Find its value after 4 years.
Solve 3^(x+1)=36 for x, giving an exact logarithmic expression if necessary.
Solve 3^(x+1)=45 for x, giving an exact logarithmic expression if necessary.
Solve 3^(x+1)=54 for x, giving an exact logarithmic expression if necessary.
Solve 3^(x+1)=63 for x, giving an exact logarithmic expression if necessary.
Solve 3^(x+1)=72 for x, giving an exact logarithmic expression if necessary.
Solve 3^(x+1)=81 for x, giving an exact logarithmic expression if necessary.
Solve 3^(x+1)=90 for x, giving an exact logarithmic expression if necessary.
Solve 3^(x+1)=18 for x, giving an exact logarithmic expression if necessary.
Solve 3^(x+1)=27 for x, giving an exact logarithmic expression if necessary.
Solve 3^(x+1)=36 for x, giving an exact logarithmic expression if necessary.
Solve ln(x−5)= 7 and state the domain restriction.
Solve ln(x−6)= 3 and state the domain restriction.
Solve ln(x−7)= 6 and state the domain restriction.
Solve ln(x−8)= 2 and state the domain restriction.
Solve ln(x−9)= 5 and state the domain restriction.
Solve ln(x−10)= 1 and state the domain restriction.
Solve ln(x−2)= 4 and state the domain restriction.
Solve ln(x−3)= 7 and state the domain restriction.
Solve ln(x−4)= 3 and state the domain restriction.
Solve ln(x−5)= 6 and state the domain restriction.
A substance decays according to M(t)=480e^(−0.2t). Find M(5) to 3 significant figures.
A substance decays according to M(t)=560e^(−0.5t). Find M(5) to 3 significant figures.
A substance decays according to M(t)=640e^(−0.1t). Find M(5) to 3 significant figures.
A substance decays according to M(t)=720e^(−0.4t). Find M(5) to 3 significant figures.
A substance decays according to M(t)=800e^(−0.7t). Find M(5) to 3 significant figures.
A substance decays according to M(t)=160e^(−0.3t). Find M(5) to 3 significant figures.
A substance decays according to M(t)=240e^(−0.6t). Find M(5) to 3 significant figures.
A substance decays according to M(t)=320e^(−0.2t). Find M(5) to 3 significant figures.
A substance decays according to M(t)=400e^(−0.5t). Find M(5) to 3 significant figures.
A substance decays according to M(t)=480e^(−0.1t). Find M(5) to 3 significant figures.
A bank account compounds annually at 6% from $3500. Find the balance after 6 years.
A bank account compounds annually at 9% from $4000. Find the balance after 6 years.
A bank account compounds annually at 5% from $4500. Find the balance after 6 years.
A bank account compounds annually at 8% from $5000. Find the balance after 6 years.
A bank account compounds annually at 4% from $1000. Find the balance after 6 years.
A bank account compounds annually at 7% from $1500. Find the balance after 6 years.
A bank account compounds annually at 3% from $2000. Find the balance after 6 years.
A bank account compounds annually at 6% from $2500. Find the balance after 6 years.
A bank account compounds annually at 9% from $3000. Find the balance after 6 years.
A bank account compounds annually at 5% from $3500. Find the balance after 6 years.
A quantity follows P(t)=P₀e^(kt). It grows from 800 to 1600 in 6 years. Find k.
A quantity follows P(t)=P₀e^(kt). It grows from 900 to 1800 in 2 years. Find k.
A quantity follows P(t)=P₀e^(kt). It grows from 1000 to 2000 in 5 years. Find k.
A quantity follows P(t)=P₀e^(kt). It grows from 200 to 400 in 1 years. Find k.
A quantity follows P(t)=P₀e^(kt). It grows from 300 to 600 in 4 years. Find k.
A quantity follows P(t)=P₀e^(kt). It grows from 400 to 800 in 7 years. Find k.
A quantity follows P(t)=P₀e^(kt). It grows from 500 to 1000 in 3 years. Find k.
A quantity follows P(t)=P₀e^(kt). It grows from 600 to 1200 in 6 years. Find k.
A quantity follows P(t)=P₀e^(kt). It grows from 700 to 1400 in 2 years. Find k.
A quantity follows P(t)=P₀e^(kt). It grows from 800 to 1600 in 5 years. Find k.
7. Geometry and trigonometry
Scope: Euclidean geometry, bearings, sine/cosine rules, area, arcs, radians and trigonometric models. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 7
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. A triangle has sides 7 cm, 8 cm and 9 cm. Find its area using Heron's formula.
- Calculate the semi-perimeter: s=(7+8+9)/2=12 cm.
- Apply Heron's formula A=√[s(s−a)(s−b)(s−c)].
- Substitute: A=√[12(12−7)(12−8)(12−9)]=√(12×5×4×3)=√720.
- Simplify √720=12√5≈26.83. Answer: approximately 26.8 cm².
Worked problem 2. In a triangle, a=8 cm, b=11 cm and included angle C=42°. Find c.
- Identify the included angle C=42° between sides a=8 and b=11.
- Apply cosine rule c²=a²+b²−2ab cos C.
- Substitute: c²=64+121−176cos42°.
- Evaluate: c²≈54.6, so c≈√54.6≈7.39 cm. Answer: c≈7.39 cm.
Worked problem 3. A sector has radius 6 cm and angle 1.8 radians. Find its area and arc length.
- The angle is already in radians, so use sector formulae directly.
- Arc length s=rθ=6×1.8=10.8 cm.
- Sector area A=½r²θ=½×36×1.8=32.4 cm². Answer: arc length 10.8 cm and area 32.4 cm².
Worked problem 4. A ladder 5.2 m long makes an angle of 68° with horizontal ground. Find the height reached.
- The ladder is the hypotenuse, 5.2 m, and the required height is opposite the 68° angle.
- Use sin68°=height/5.2.
- height=5.2sin68°.
- Evaluate to obtain 4.82 m (3 s.f.). Answer: approximately 4.82 m.
Worked problem 5. A bearing from A to B is 035°. Find the reverse bearing from B to A.
- A reverse bearing differs by 180°.
- Add 180° to 035°: 035°+180°=215°.
- The result is already between 000° and 360°. Answer: 215°.
Mock questions — 70 questions
A triangle has sides 6, 6, 9 cm. Use Heron's formula to calculate its area to 3 significant figures.
A triangle has sides 7, 9, 14 cm. Use Heron's formula to calculate its area to 3 significant figures.
A triangle has sides 8, 12, 19 cm. Use Heron's formula to calculate its area to 3 significant figures.
A triangle has sides 9, 8, 13 cm. Use Heron's formula to calculate its area to 3 significant figures.
A triangle has sides 10, 11, 18 cm. Use Heron's formula to calculate its area to 3 significant figures.
A triangle has sides 11, 7, 12 cm. Use Heron's formula to calculate its area to 3 significant figures.
A triangle has sides 12, 10, 17 cm. Use Heron's formula to calculate its area to 3 significant figures.
A triangle has sides 13, 6, 11 cm. Use Heron's formula to calculate its area to 3 significant figures.
A triangle has sides 14, 9, 16 cm. Use Heron's formula to calculate its area to 3 significant figures.
A triangle has sides 6, 12, 10 cm. Use Heron's formula to calculate its area to 3 significant figures.
In triangle ABC, a=8, b=9 and angle C=49°. Find side c using the cosine rule.
In triangle ABC, a=9, b=12 and angle C=52°. Find side c using the cosine rule.
In triangle ABC, a=10, b=8 and angle C=55°. Find side c using the cosine rule.
In triangle ABC, a=11, b=11 and angle C=58°. Find side c using the cosine rule.
In triangle ABC, a=12, b=7 and angle C=61°. Find side c using the cosine rule.
In triangle ABC, a=13, b=10 and angle C=64°. Find side c using the cosine rule.
In triangle ABC, a=14, b=13 and angle C=67°. Find side c using the cosine rule.
In triangle ABC, a=15, b=9 and angle C=70°. Find side c using the cosine rule.
In triangle ABC, a=7, b=12 and angle C=46°. Find side c using the cosine rule.
In triangle ABC, a=8, b=8 and angle C=49°. Find side c using the cosine rule.
A sector has radius 7 cm and angle 0.5 radians. Find its arc length and area.
A sector has radius 8 cm and angle 0.1 radians. Find its arc length and area.
A sector has radius 9 cm and angle 0.4 radians. Find its arc length and area.
A sector has radius 10 cm and angle 0.7 radians. Find its arc length and area.
A sector has radius 11 cm and angle 0.3 radians. Find its arc length and area.
A sector has radius 12 cm and angle 0.6 radians. Find its arc length and area.
A sector has radius 13 cm and angle 0.2 radians. Find its arc length and area.
A sector has radius 5 cm and angle 0.5 radians. Find its arc length and area.
A sector has radius 6 cm and angle 0.1 radians. Find its arc length and area.
A sector has radius 7 cm and angle 0.4 radians. Find its arc length and area.
A bearing is 70°. Find the corresponding clockwise angle from west and sketch the direction.
A bearing is 80°. Find the corresponding clockwise angle from west and sketch the direction.
A bearing is 90°. Find the corresponding clockwise angle from west and sketch the direction.
A bearing is 100°. Find the corresponding clockwise angle from west and sketch the direction.
A bearing is 110°. Find the corresponding clockwise angle from west and sketch the direction.
A bearing is 120°. Find the corresponding clockwise angle from west and sketch the direction.
A bearing is 40°. Find the corresponding clockwise angle from west and sketch the direction.
A bearing is 50°. Find the corresponding clockwise angle from west and sketch the direction.
A bearing is 60°. Find the corresponding clockwise angle from west and sketch the direction.
A bearing is 70°. Find the corresponding clockwise angle from west and sketch the direction.
Solve 2sinθ=1.2 for 0°≤θ≤360°, giving all solutions to 1 decimal place.
Solve 2sinθ=1.4 for 0°≤θ≤360°, giving all solutions to 1 decimal place.
Solve 2sinθ=1.6 for 0°≤θ≤360°, giving all solutions to 1 decimal place.
Solve 2sinθ=1.8 for 0°≤θ≤360°, giving all solutions to 1 decimal place.
Solve 2sinθ=2 for 0°≤θ≤360°, giving all solutions to 1 decimal place.
Solve 2sinθ=0.4 for 0°≤θ≤360°, giving all solutions to 1 decimal place.
Solve 2sinθ=0.6 for 0°≤θ≤360°, giving all solutions to 1 decimal place.
Solve 2sinθ=0.8 for 0°≤θ≤360°, giving all solutions to 1 decimal place.
Solve 2sinθ=1 for 0°≤θ≤360°, giving all solutions to 1 decimal place.
Solve 2sinθ=1.2 for 0°≤θ≤360°, giving all solutions to 1 decimal place.
A ramp rises 9 m over a horizontal distance 9 m. Find its inclination and length.
A ramp rises 10 m over a horizontal distance 12 m. Find its inclination and length.
A ramp rises 11 m over a horizontal distance 8 m. Find its inclination and length.
A ramp rises 12 m over a horizontal distance 11 m. Find its inclination and length.
A ramp rises 4 m over a horizontal distance 7 m. Find its inclination and length.
A ramp rises 5 m over a horizontal distance 10 m. Find its inclination and length.
A ramp rises 6 m over a horizontal distance 6 m. Find its inclination and length.
A ramp rises 7 m over a horizontal distance 9 m. Find its inclination and length.
A ramp rises 8 m over a horizontal distance 12 m. Find its inclination and length.
A ramp rises 9 m over a horizontal distance 8 m. Find its inclination and length.
A triangle has sides 11 and 13 with included angle 48°. Calculate its area.
A triangle has sides 12 and 9 with included angle 63°. Calculate its area.
A triangle has sides 13 and 12 with included angle 45°. Calculate its area.
A triangle has sides 5 and 8 with included angle 60°. Calculate its area.
A triangle has sides 6 and 11 with included angle 42°. Calculate its area.
A triangle has sides 7 and 14 with included angle 57°. Calculate its area.
A triangle has sides 8 and 10 with included angle 39°. Calculate its area.
A triangle has sides 9 and 13 with included angle 54°. Calculate its area.
A triangle has sides 10 and 9 with included angle 69°. Calculate its area.
A triangle has sides 11 and 12 with included angle 51°. Calculate its area.
8. Vectors and three-dimensional geometry
Scope: Vector operations, lines, planes, distances, angles and intersections; depth depends on AA/AI level. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 8
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. Find the angle between vectors a=(2,−1,2) and b=(1,2,2).
- Use cosθ=(a·b)/(|a||b|).
- Dot product: a·b=2(1)+(−1)(2)+2(2)=2−2+4=4.
- Magnitudes: |a|=√(4+1+4)=3 and |b|=√(1+4+4)=3.
- cosθ=4/(3×3)=4/9.
- θ=cos⁻¹(4/9)≈63.6°. Answer: 63.6°.
Worked problem 2. Find the point dividing A(1,2,−1) to B(7,−4,5) internally in the ratio 2:1.
- Internal ratio AP:PB=2:1 means P is two-thirds of the way from A to B.
- Use P=(A+2B)/3.
- Substitute coordinates: ((1+2×7)/3,(2+2×−4)/3,(−1+2×5)/3).
- Simplify: (15/3,−6/3,9/3). Answer: P=(5,−2,3).
Worked problem 3. A line is r=(1,0,2)+t(2,−1,1). Find the point when t=3.
- The line is r=a+td, with a=(1,0,2), d=(2,−1,1).
- Substitute t=3: r=(1,0,2)+3(2,−1,1).
- Multiply: (6,−3,3).
- Add componentwise: (1+6,0−3,2+3). Answer: (7,−3,5).
Worked problem 4. Find the magnitude of vector (−3,4,12).
- The magnitude of (x,y,z) is √(x²+y²+z²).
- Substitute: √[(−3)²+4²+12²].
- Evaluate: √(9+16+144)=√169. Answer: 13.
Worked problem 5. For a=(1,2,0), b=(3,−1,2), calculate a×b.
- Set up the determinant: a×b=|i j k; 1 2 0; 3 −1 2|.
- i-component: 2(2)−0(−1)=4.
- j-component: −[1(2)−0(3)]=−2.
- k-component: 1(−1)−2(3)=−7. Answer: a×b=(4,−2,−7).
Mock questions — 70 questions
Given a=( 2, 1, −3) and b=( 3, −2, 1), calculate a·b and |a|.
Given a=( 3, 4, −8) and b=( 8, −3, 4), calculate a·b and |a|.
Given a=( 4, 7, −13) and b=( 13, −4, 7), calculate a·b and |a|.
Given a=( 5, 3, −7) and b=( 7, −5, 3), calculate a·b and |a|.
Given a=( 6, 6, −12) and b=( 12, −6, 6), calculate a·b and |a|.
Given a=( 7, 2, −6) and b=( 6, −7, 2), calculate a·b and |a|.
Given a=( 8, 5, −11) and b=( 11, −8, 5), calculate a·b and |a|.
Given a=( 9, 1, −5) and b=( 5, −9, 1), calculate a·b and |a|.
Given a=( 10, 4, −10) and b=( 10, −10, 4), calculate a·b and |a|.
Given a=( 2, 7, −4) and b=( 4, −2, 7), calculate a·b and |a|.
Find the magnitude and unit vector in the direction of v=( 3, 6, 9).
Find the magnitude and unit vector in the direction of v=( 4, 12, 3).
Find the magnitude and unit vector in the direction of v=( 5, 4, 8).
Find the magnitude and unit vector in the direction of v=( 6, 10, 13).
Find the magnitude and unit vector in the direction of v=( 7, 2, 7).
Find the magnitude and unit vector in the direction of v=( 8, 8, 12).
Find the magnitude and unit vector in the direction of v=( 9, 14, 6).
Find the magnitude and unit vector in the direction of v=( 10, 6, 11).
Find the magnitude and unit vector in the direction of v=( 2, 12, 5).
Find the magnitude and unit vector in the direction of v=( 3, 4, 10).
Find the vector equation of the line through A(4,5,0) parallel to d=(1,4,−2).
Find the vector equation of the line through A(5,1,0) parallel to d=(1,9,−2).
Find the vector equation of the line through A(6,4,0) parallel to d=(1,3,−2).
Find the vector equation of the line through A(7,7,0) parallel to d=(1,8,−2).
Find the vector equation of the line through A(8,3,0) parallel to d=(1,13,−2).
Find the vector equation of the line through A(9,6,0) parallel to d=(1,7,−2).
Find the vector equation of the line through A(10,2,0) parallel to d=(1,12,−2).
Find the vector equation of the line through A(2,5,0) parallel to d=(1,6,−2).
Find the vector equation of the line through A(3,1,0) parallel to d=(1,11,−2).
Find the vector equation of the line through A(4,4,0) parallel to d=(1,5,−2).
Determine whether vectors (1,5,2) and (2,10,4) are parallel, and justify your answer.
Determine whether vectors (1,6,2) and (2,12,4) are parallel, and justify your answer.
Determine whether vectors (1,7,2) and (2,14,4) are parallel, and justify your answer.
Determine whether vectors (1,8,2) and (2,16,4) are parallel, and justify your answer.
Determine whether vectors (1,9,2) and (2,18,4) are parallel, and justify your answer.
Determine whether vectors (1,10,2) and (2,20,4) are parallel, and justify your answer.
Determine whether vectors (1,2,2) and (2,4,4) are parallel, and justify your answer.
Determine whether vectors (1,3,2) and (2,6,4) are parallel, and justify your answer.
Determine whether vectors (1,4,2) and (2,8,4) are parallel, and justify your answer.
Determine whether vectors (1,5,2) and (2,10,4) are parallel, and justify your answer.
Find the distance between P(6,2,5) and Q(−6,5,2).
Find the distance between P(7,5,10) and Q(−7,10,5).
Find the distance between P(8,1,4) and Q(−8,4,1).
Find the distance between P(9,4,9) and Q(−9,9,4).
Find the distance between P(10,7,3) and Q(−10,3,7).
Find the distance between P(2,3,8) and Q(−2,8,3).
Find the distance between P(3,6,13) and Q(−3,13,6).
Find the distance between P(4,2,7) and Q(−4,7,2).
Find the distance between P(5,5,12) and Q(−5,12,5).
Find the distance between P(6,1,6) and Q(−6,6,1).
A displacement is 4i−7j+4k. Find its magnitude and direction cosines.
A displacement is 4i−8j+7k. Find its magnitude and direction cosines.
A displacement is 4i−9j+3k. Find its magnitude and direction cosines.
A displacement is 4i−10j+6k. Find its magnitude and direction cosines.
A displacement is 4i−2j+2k. Find its magnitude and direction cosines.
A displacement is 4i−3j+5k. Find its magnitude and direction cosines.
A displacement is 4i−4j+1k. Find its magnitude and direction cosines.
A displacement is 4i−5j+4k. Find its magnitude and direction cosines.
A displacement is 4i−6j+7k. Find its magnitude and direction cosines.
A displacement is 4i−7j+3k. Find its magnitude and direction cosines.
Find the midpoint and length of the segment joining A(8,0,6) and B(0,6,−8).
Find the midpoint and length of the segment joining A(9,0,2) and B(0,11,−9).
Find the midpoint and length of the segment joining A(10,0,5) and B(0,5,−10).
Find the midpoint and length of the segment joining A(2,0,1) and B(0,10,−2).
Find the midpoint and length of the segment joining A(3,0,4) and B(0,4,−3).
Find the midpoint and length of the segment joining A(4,0,7) and B(0,9,−4).
Find the midpoint and length of the segment joining A(5,0,3) and B(0,3,−5).
Find the midpoint and length of the segment joining A(6,0,6) and B(0,8,−6).
Find the midpoint and length of the segment joining A(7,0,2) and B(0,13,−7).
Find the midpoint and length of the segment joining A(8,0,5) and B(0,7,−8).
9. Statistics, data analysis and interpretation
Scope: Measures, spread, quartiles, sampling, distributions, data displays and contextual interpretation. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 9
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. For data 4, 7, 7, 9, 13, find mean, median and population standard deviation.
- Add the observations: 4+7+7+9+13=40; divide by 5 to get mean 8.
- The ordered middle value is 7, so median=7.
- Deviations from 8 are −4,−1,−1,1,5; squared deviations sum to 44.
- Population variance=44/5=8.8.
- Population standard deviation=√8.8≈2.97. Answer: mean 8, median 7, σ≈2.97.
Worked problem 2. A grouped class has frequencies 3, 5, 7 at midpoints 10, 20, 30. Estimate the mean.
- For grouped data, estimate the total using frequency×class midpoint.
- Calculate 3×10=30, 5×20=100 and 7×30=210.
- Add weighted values: 30+100+210=340.
- Total frequency=3+5+7=15.
- Estimated mean=340/15≈22.7. Answer: 22.7.
Worked problem 3. The quartiles are Q₁=12 and Q₃=29. Find the interquartile range and identify the upper outlier fence.
- Calculate the interquartile range: IQR=Q₃−Q₁=29−12=17.
- The upper outlier fence is Q₃+1.5(IQR).
- Substitute: 29+1.5(17)=29+25.5=54.5. Answer: IQR=17 and upper fence=54.5; values above 54.5 are potential high outliers.
Worked problem 4. A sample has variance 25. What is its standard deviation, and what happens to the standard deviation if every value is multiplied by 3?
- Standard deviation is the positive square root of variance: s=√25=5.
- Multiplying every observation by a constant k multiplies standard deviation by |k|.
- Here k=3, so new SD=3×5=15. Answer: original SD 5; new SD 15.
Worked problem 5. A data set has mean 18. Four observations total 60. Find the fifth observation.
- Mean=total/n, so total of five observations=18×5=90.
- The four known observations sum to 60.
- Missing observation=90−60=30. Answer: 30.
Mock questions — 70 questions
The data are 2, 3, 5, 5, 7, 10, 11. Find the mean, median and range.
The data are 3, 4, 6, 6, 8, 11, 12. Find the mean, median and range.
The data are 4, 5, 7, 7, 9, 12, 13. Find the mean, median and range.
The data are 5, 6, 8, 8, 10, 13, 14. Find the mean, median and range.
The data are 6, 7, 9, 9, 11, 14, 15. Find the mean, median and range.
The data are 7, 8, 10, 10, 12, 15, 16. Find the mean, median and range.
The data are 8, 9, 11, 11, 13, 16, 17. Find the mean, median and range.
The data are 9, 10, 12, 12, 14, 17, 18. Find the mean, median and range.
The data are 10, 11, 13, 13, 15, 18, 19. Find the mean, median and range.
The data are 2, 3, 5, 5, 7, 10, 11. Find the mean, median and range.
A data set has Q₁=3, median=7, Q₃=13. Calculate the interquartile range and identify the upper 1.5 IQR fence.
A data set has Q₁=4, median=8, Q₃=14. Calculate the interquartile range and identify the upper 1.5 IQR fence.
A data set has Q₁=5, median=9, Q₃=15. Calculate the interquartile range and identify the upper 1.5 IQR fence.
A data set has Q₁=6, median=10, Q₃=16. Calculate the interquartile range and identify the upper 1.5 IQR fence.
A data set has Q₁=7, median=11, Q₃=17. Calculate the interquartile range and identify the upper 1.5 IQR fence.
A data set has Q₁=8, median=12, Q₃=18. Calculate the interquartile range and identify the upper 1.5 IQR fence.
A data set has Q₁=9, median=13, Q₃=19. Calculate the interquartile range and identify the upper 1.5 IQR fence.
A data set has Q₁=10, median=14, Q₃=20. Calculate the interquartile range and identify the upper 1.5 IQR fence.
A data set has Q₁=2, median=6, Q₃=12. Calculate the interquartile range and identify the upper 1.5 IQR fence.
A data set has Q₁=3, median=7, Q₃=13. Calculate the interquartile range and identify the upper 1.5 IQR fence.
The grouped frequency table has class midpoints 5, 15, 25, 35 and frequencies 4, 5, 4, 6. Estimate the mean.
The grouped frequency table has class midpoints 5, 15, 25, 35 and frequencies 5, 1, 9, 7. Estimate the mean.
The grouped frequency table has class midpoints 5, 15, 25, 35 and frequencies 6, 4, 3, 8. Estimate the mean.
The grouped frequency table has class midpoints 5, 15, 25, 35 and frequencies 7, 7, 8, 9. Estimate the mean.
The grouped frequency table has class midpoints 5, 15, 25, 35 and frequencies 8, 3, 13, 10. Estimate the mean.
The grouped frequency table has class midpoints 5, 15, 25, 35 and frequencies 9, 6, 7, 11. Estimate the mean.
The grouped frequency table has class midpoints 5, 15, 25, 35 and frequencies 10, 2, 12, 12. Estimate the mean.
The grouped frequency table has class midpoints 5, 15, 25, 35 and frequencies 2, 5, 6, 4. Estimate the mean.
The grouped frequency table has class midpoints 5, 15, 25, 35 and frequencies 3, 1, 11, 5. Estimate the mean.
The grouped frequency table has class midpoints 5, 15, 25, 35 and frequencies 4, 4, 5, 6. Estimate the mean.
A sample mean is 20 and standard deviation 9. Calculate the coefficient of variation as a percentage.
A sample mean is 22 and standard deviation 5. Calculate the coefficient of variation as a percentage.
A sample mean is 24 and standard deviation 8. Calculate the coefficient of variation as a percentage.
A sample mean is 26 and standard deviation 4. Calculate the coefficient of variation as a percentage.
A sample mean is 28 and standard deviation 7. Calculate the coefficient of variation as a percentage.
A sample mean is 30 and standard deviation 3. Calculate the coefficient of variation as a percentage.
A sample mean is 14 and standard deviation 6. Calculate the coefficient of variation as a percentage.
A sample mean is 16 and standard deviation 9. Calculate the coefficient of variation as a percentage.
A sample mean is 18 and standard deviation 5. Calculate the coefficient of variation as a percentage.
A sample mean is 20 and standard deviation 8. Calculate the coefficient of variation as a percentage.
Five test scores are 30, 34, 36, 38, 42. Find the population variance and standard deviation.
Five test scores are 35, 39, 41, 43, 47. Find the population variance and standard deviation.
Five test scores are 40, 44, 46, 48, 52. Find the population variance and standard deviation.
Five test scores are 45, 49, 51, 53, 57. Find the population variance and standard deviation.
Five test scores are 50, 54, 56, 58, 62. Find the population variance and standard deviation.
Five test scores are 10, 14, 16, 18, 22. Find the population variance and standard deviation.
Five test scores are 15, 19, 21, 23, 27. Find the population variance and standard deviation.
Five test scores are 20, 24, 26, 28, 32. Find the population variance and standard deviation.
Five test scores are 25, 29, 31, 33, 37. Find the population variance and standard deviation.
Five test scores are 30, 34, 36, 38, 42. Find the population variance and standard deviation.
A box plot has minimum 7, Q₁=10, median=13, Q₃=16, maximum=22. Calculate IQR and assess possible outliers using 1.5 IQR fences.
A box plot has minimum 8, Q₁=11, median=14, Q₃=17, maximum=23. Calculate IQR and assess possible outliers using 1.5 IQR fences.
A box plot has minimum 9, Q₁=12, median=15, Q₃=18, maximum=24. Calculate IQR and assess possible outliers using 1.5 IQR fences.
A box plot has minimum 10, Q₁=13, median=16, Q₃=19, maximum=25. Calculate IQR and assess possible outliers using 1.5 IQR fences.
A box plot has minimum 2, Q₁=5, median=8, Q₃=11, maximum=17. Calculate IQR and assess possible outliers using 1.5 IQR fences.
A box plot has minimum 3, Q₁=6, median=9, Q₃=12, maximum=18. Calculate IQR and assess possible outliers using 1.5 IQR fences.
A box plot has minimum 4, Q₁=7, median=10, Q₃=13, maximum=19. Calculate IQR and assess possible outliers using 1.5 IQR fences.
A box plot has minimum 5, Q₁=8, median=11, Q₃=14, maximum=20. Calculate IQR and assess possible outliers using 1.5 IQR fences.
A box plot has minimum 6, Q₁=9, median=12, Q₃=15, maximum=21. Calculate IQR and assess possible outliers using 1.5 IQR fences.
A box plot has minimum 7, Q₁=10, median=13, Q₃=16, maximum=22. Calculate IQR and assess possible outliers using 1.5 IQR fences.
A survey of 160 people reports 60% choosing option A. Estimate the number choosing A and discuss one sampling limitation.
A survey of 180 people reports 20% choosing option A. Estimate the number choosing A and discuss one sampling limitation.
A survey of 200 people reports 50% choosing option A. Estimate the number choosing A and discuss one sampling limitation.
A survey of 40 people reports 10% choosing option A. Estimate the number choosing A and discuss one sampling limitation.
A survey of 60 people reports 40% choosing option A. Estimate the number choosing A and discuss one sampling limitation.
A survey of 80 people reports 70% choosing option A. Estimate the number choosing A and discuss one sampling limitation.
A survey of 100 people reports 30% choosing option A. Estimate the number choosing A and discuss one sampling limitation.
A survey of 120 people reports 60% choosing option A. Estimate the number choosing A and discuss one sampling limitation.
A survey of 140 people reports 20% choosing option A. Estimate the number choosing A and discuss one sampling limitation.
A survey of 160 people reports 50% choosing option A. Estimate the number choosing A and discuss one sampling limitation.
10. Probability and probability distributions
Scope: Conditional probability, independence, binomial/normal models and discrete distributions within course scope. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 10
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. A bag has 5 red and 3 blue counters. Two are drawn without replacement. Find P(both red).
- Initially there are 8 counters, of which 5 are red, so P(first red)=5/8.
- Without replacement, after a red counter is drawn there are 7 counters left and 4 red.
- P(second red | first red)=4/7.
- Multiply: P(both red)=5/8×4/7=20/56=5/14. Answer: 5/14.
Worked problem 2. A fair coin is tossed 5 times. Find the probability of exactly 3 heads.
- The number of ways to choose 3 head positions among 5 tosses is ⁵C₃=10.
- Each exact sequence has probability (1/2)^5=1/32.
- Multiply: P(X=3)=10×1/32=10/32.
- Simplify. Answer: 5/16.
Worked problem 3. A machine produces 4% defective items. In a sample of 10, find the probability of no defectives.
- Let X be the number of defective items. Under the stated independent constant-rate model, X~B(10,0.04).
- No defectives means X=0.
- Apply P(X=0)=¹⁰C₀(0.04)^0(0.96)^10.
- Evaluate 0.96^10≈0.6648. Answer: approximately 0.6648.
Worked problem 4. Events A and B have P(A)=0.6, P(B)=0.5 and P(A∩B)=0.2. Find P(A∪B) and test independence.
- Use the addition rule: P(A∪B)=P(A)+P(B)−P(A∩B).
- Substitute: 0.6+0.5−0.2=0.9.
- For independence, check P(A∩B)=P(A)P(B).
- Product=0.6×0.5=0.3, which differs from 0.2. Answer: P(A∪B)=0.9; events are not independent.
Worked problem 5. A normal variable has mean 50 and standard deviation 8. Find the z-score for x=62.
- Standardise using z=(x−μ)/σ.
- Substitute x=62, μ=50, σ=8.
- z=(62−50)/8=12/8=1.5. Answer: z=1.50, so the value is 1.5 standard deviations above the mean.
Mock questions — 70 questions
A fair die is rolled twice. Find the probability that the sum is 7.
A fair die is rolled twice. Find the probability that the sum is 8.
A fair die is rolled twice. Find the probability that the sum is 9.
A fair die is rolled twice. Find the probability that the sum is 10.
A fair die is rolled twice. Find the probability that the sum is 11.
A fair die is rolled twice. Find the probability that the sum is 12.
A fair die is rolled twice. Find the probability that the sum is 13.
A fair die is rolled twice. Find the probability that the sum is 14.
A fair die is rolled twice. Find the probability that the sum is 15.
A fair die is rolled twice. Find the probability that the sum is 7.
A bag contains 3 red, 3 blue and 9 green counters. Two are drawn without replacement. Find P(both red).
A bag contains 4 red, 6 blue and 3 green counters. Two are drawn without replacement. Find P(both red).
A bag contains 5 red, 2 blue and 8 green counters. Two are drawn without replacement. Find P(both red).
A bag contains 6 red, 5 blue and 13 green counters. Two are drawn without replacement. Find P(both red).
A bag contains 7 red, 1 blue and 7 green counters. Two are drawn without replacement. Find P(both red).
A bag contains 8 red, 4 blue and 12 green counters. Two are drawn without replacement. Find P(both red).
A bag contains 9 red, 7 blue and 6 green counters. Two are drawn without replacement. Find P(both red).
A bag contains 10 red, 3 blue and 11 green counters. Two are drawn without replacement. Find P(both red).
A bag contains 2 red, 6 blue and 5 green counters. Two are drawn without replacement. Find P(both red).
A bag contains 3 red, 2 blue and 10 green counters. Two are drawn without replacement. Find P(both red).
For X~B(9,0.2), calculate P(X=2) and the expected value.
For X~B(10,0.2), calculate P(X=2) and the expected value.
For X~B(11,0.2), calculate P(X=2) and the expected value.
For X~B(12,0.2), calculate P(X=2) and the expected value.
For X~B(13,0.2), calculate P(X=2) and the expected value.
For X~B(14,0.2), calculate P(X=2) and the expected value.
For X~B(15,0.2), calculate P(X=2) and the expected value.
For X~B(7,0.2), calculate P(X=2) and the expected value.
For X~B(8,0.2), calculate P(X=2) and the expected value.
For X~B(9,0.2), calculate P(X=2) and the expected value.
Events A and B have P(A)=0.5 and P(B)=0.7. If independent, calculate P(A∩B) and P(A∪B).
Events A and B have P(A)=0.6 and P(B)=0.3. If independent, calculate P(A∩B) and P(A∪B).
Events A and B have P(A)=0.7 and P(B)=0.6. If independent, calculate P(A∩B) and P(A∪B).
Events A and B have P(A)=0.8 and P(B)=0.2. If independent, calculate P(A∩B) and P(A∪B).
Events A and B have P(A)=0.9 and P(B)=0.5. If independent, calculate P(A∩B) and P(A∪B).
Events A and B have P(A)=1 and P(B)=0.1. If independent, calculate P(A∩B) and P(A∪B).
Events A and B have P(A)=0.2 and P(B)=0.4. If independent, calculate P(A∩B) and P(A∪B).
Events A and B have P(A)=0.3 and P(B)=0.7. If independent, calculate P(A∩B) and P(A∪B).
Events A and B have P(A)=0.4 and P(B)=0.3. If independent, calculate P(A∩B) and P(A∪B).
Events A and B have P(A)=0.5 and P(B)=0.6. If independent, calculate P(A∩B) and P(A∪B).
A normal variable has mean 100 and standard deviation 4. Find P(X>104) using Φ(1)=0.8413.
A normal variable has mean 110 and standard deviation 7. Find P(X>117) using Φ(1)=0.8413.
A normal variable has mean 120 and standard deviation 3. Find P(X>123) using Φ(1)=0.8413.
A normal variable has mean 130 and standard deviation 6. Find P(X>136) using Φ(1)=0.8413.
A normal variable has mean 140 and standard deviation 9. Find P(X>149) using Φ(1)=0.8413.
A normal variable has mean 60 and standard deviation 5. Find P(X>65) using Φ(1)=0.8413.
A normal variable has mean 70 and standard deviation 8. Find P(X>78) using Φ(1)=0.8413.
A normal variable has mean 80 and standard deviation 4. Find P(X>84) using Φ(1)=0.8413.
A normal variable has mean 90 and standard deviation 7. Find P(X>97) using Φ(1)=0.8413.
A normal variable has mean 100 and standard deviation 3. Find P(X>103) using Φ(1)=0.8413.
A factory produces 700 items daily; 4% are defective. Model X as binomial and find P(X=0) for a sample of 5.
A factory produces 800 items daily; 4% are defective. Model X as binomial and find P(X=0) for a sample of 5.
A factory produces 900 items daily; 4% are defective. Model X as binomial and find P(X=0) for a sample of 5.
A factory produces 1000 items daily; 4% are defective. Model X as binomial and find P(X=0) for a sample of 5.
A factory produces 200 items daily; 4% are defective. Model X as binomial and find P(X=0) for a sample of 5.
A factory produces 300 items daily; 4% are defective. Model X as binomial and find P(X=0) for a sample of 5.
A factory produces 400 items daily; 4% are defective. Model X as binomial and find P(X=0) for a sample of 5.
A factory produces 500 items daily; 4% are defective. Model X as binomial and find P(X=0) for a sample of 5.
A factory produces 600 items daily; 4% are defective. Model X as binomial and find P(X=0) for a sample of 5.
A factory produces 700 items daily; 4% are defective. Model X as binomial and find P(X=0) for a sample of 5.
A test has sensitivity 0.9 and false-positive rate 0.08. Disease prevalence is 0.02. Use Bayes' theorem to find P(disease | positive).
A test has sensitivity 0.9 and false-positive rate 0.08. Disease prevalence is 0.02. Use Bayes' theorem to find P(disease | positive).
A test has sensitivity 0.9 and false-positive rate 0.08. Disease prevalence is 0.02. Use Bayes' theorem to find P(disease | positive).
A test has sensitivity 0.9 and false-positive rate 0.08. Disease prevalence is 0.02. Use Bayes' theorem to find P(disease | positive).
A test has sensitivity 0.9 and false-positive rate 0.08. Disease prevalence is 0.02. Use Bayes' theorem to find P(disease | positive).
A test has sensitivity 0.9 and false-positive rate 0.08. Disease prevalence is 0.02. Use Bayes' theorem to find P(disease | positive).
A test has sensitivity 0.9 and false-positive rate 0.08. Disease prevalence is 0.02. Use Bayes' theorem to find P(disease | positive).
A test has sensitivity 0.9 and false-positive rate 0.08. Disease prevalence is 0.02. Use Bayes' theorem to find P(disease | positive).
A test has sensitivity 0.9 and false-positive rate 0.08. Disease prevalence is 0.02. Use Bayes' theorem to find P(disease | positive).
A test has sensitivity 0.9 and false-positive rate 0.08. Disease prevalence is 0.02. Use Bayes' theorem to find P(disease | positive).
11. Correlation and regression
Scope: Scatterplots, Pearson correlation, least-squares models, residuals, interpolation/extrapolation and context. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 11
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. For x=1,2,3,4 and y=3,5,7,9, find the least-squares line and interpret the gradient.
- Check the rate of change: as x increases by 1, y increases by 2 each time.
- Therefore the gradient is m=2.
- Use a point, for example (1,3), in y=2x+c: 3=2+c, so c=1.
- The least-squares line fits all four points exactly. Answer: y=2x+1; each 1-unit increase in x corresponds to a 2-unit increase in predicted y.
Worked problem 2. A regression model is y=4.2x+15. Estimate y at x=8 and explain the meaning of the intercept.
- The regression equation is already y=4.2x+15.
- Substitute x=8: y=4.2(8)+15.
- Calculate 33.6+15=48.6.
- The intercept is the predicted response when x=0; whether that has a practical interpretation depends on the context and observed data range. Answer: predicted y=48.6; intercept 15.
Worked problem 3. Given r=−0.82, describe the association and find r².
- The sign of r is negative, so the linear association is negative.
- Since |r|=0.82 is close to 1, the linear association is strong.
- Square r: r²=(−0.82)²=0.6724.
- Convert to a percentage: 67.24%. Answer: strong negative linear association; r²=0.6724.
Worked problem 4. A model fitted for x-values 10 to 30 predicts y at x=45. Explain the concern.
- The observed x-values range from 10 to 30.
- The requested prediction uses x=45, which is outside that interval.
- This is extrapolation, not interpolation.
- The relationship may change beyond the observed range, so the estimate is less reliable and should be treated cautiously. Answer: extrapolation; reliability is uncertain.
Worked problem 5. For points (1,2),(2,4),(3,5),(4,8), calculate the mean x and mean y, then state the point through which the regression line passes.
- Calculate x̄=(1+2+3+4)/4=10/4=2.5.
- Calculate ȳ=(2+4+5+8)/4=19/4=4.75.
- A least-squares regression line with an intercept passes through the point of means (x̄,ȳ). Answer: it passes through (2.5,4.75).
Mock questions — 70 questions
For x-values 1,2,3,4,5 and y-values 2,4,7,8,11, describe the association and calculate the least-squares line using technology.
For x-values 1,2,3,4,5 and y-values 3,5,8,12,15, describe the association and calculate the least-squares line using technology.
For x-values 1,2,3,4,5 and y-values 4,6,9,16,19, describe the association and calculate the least-squares line using technology.
For x-values 1,2,3,4,5 and y-values 5,7,10,13,16, describe the association and calculate the least-squares line using technology.
For x-values 1,2,3,4,5 and y-values 6,8,11,17,20, describe the association and calculate the least-squares line using technology.
For x-values 1,2,3,4,5 and y-values 7,9,12,14,17, describe the association and calculate the least-squares line using technology.
For x-values 1,2,3,4,5 and y-values 8,10,13,18,21, describe the association and calculate the least-squares line using technology.
For x-values 1,2,3,4,5 and y-values 9,11,14,15,18, describe the association and calculate the least-squares line using technology.
For x-values 1,2,3,4,5 and y-values 10,12,15,19,22, describe the association and calculate the least-squares line using technology.
For x-values 1,2,3,4,5 and y-values 2,4,7,14,17, describe the association and calculate the least-squares line using technology.
A regression model is ŷ=1.5x+6. Predict y at x=13 and interpret the gradient in context.
A regression model is ŷ=2x+9. Predict y at x=7 and interpret the gradient in context.
A regression model is ŷ=2.5x+5. Predict y at x=12 and interpret the gradient in context.
A regression model is ŷ=3x+8. Predict y at x=17 and interpret the gradient in context.
A regression model is ŷ=3.5x+4. Predict y at x=11 and interpret the gradient in context.
A regression model is ŷ=4x+7. Predict y at x=16 and interpret the gradient in context.
A regression model is ŷ=4.5x+10. Predict y at x=10 and interpret the gradient in context.
A regression model is ŷ=5x+6. Predict y at x=15 and interpret the gradient in context.
A regression model is ŷ=1x+9. Predict y at x=9 and interpret the gradient in context.
A regression model is ŷ=1.5x+5. Predict y at x=14 and interpret the gradient in context.
For observed y=16 and predicted ŷ=13, calculate the residual and state what its sign means.
For observed y=19 and predicted ŷ=16, calculate the residual and state what its sign means.
For observed y=22 and predicted ŷ=19, calculate the residual and state what its sign means.
For observed y=25 and predicted ŷ=22, calculate the residual and state what its sign means.
For observed y=28 and predicted ŷ=25, calculate the residual and state what its sign means.
For observed y=31 and predicted ŷ=28, calculate the residual and state what its sign means.
For observed y=34 and predicted ŷ=31, calculate the residual and state what its sign means.
For observed y=10 and predicted ŷ=7, calculate the residual and state what its sign means.
For observed y=13 and predicted ŷ=10, calculate the residual and state what its sign means.
For observed y=16 and predicted ŷ=13, calculate the residual and state what its sign means.
A dataset has Pearson r=−0.86. Interpret direction and strength, and explain why this does not prove causation.
A dataset has Pearson r=−0.86. Interpret direction and strength, and explain why this does not prove causation.
A dataset has Pearson r=−0.86. Interpret direction and strength, and explain why this does not prove causation.
A dataset has Pearson r=−0.86. Interpret direction and strength, and explain why this does not prove causation.
A dataset has Pearson r=−0.86. Interpret direction and strength, and explain why this does not prove causation.
A dataset has Pearson r=−0.86. Interpret direction and strength, and explain why this does not prove causation.
A dataset has Pearson r=−0.86. Interpret direction and strength, and explain why this does not prove causation.
A dataset has Pearson r=−0.86. Interpret direction and strength, and explain why this does not prove causation.
A dataset has Pearson r=−0.86. Interpret direction and strength, and explain why this does not prove causation.
A dataset has Pearson r=−0.86. Interpret direction and strength, and explain why this does not prove causation.
A line of best fit is y=12.4−0.75x. Find the predicted value at x=8 and explain whether prediction at x=80 is interpolation or extrapolation if data range is 2 to 15.
A line of best fit is y=12.4−0.75x. Find the predicted value at x=8 and explain whether prediction at x=80 is interpolation or extrapolation if data range is 2 to 15.
A line of best fit is y=12.4−0.75x. Find the predicted value at x=8 and explain whether prediction at x=80 is interpolation or extrapolation if data range is 2 to 15.
A line of best fit is y=12.4−0.75x. Find the predicted value at x=8 and explain whether prediction at x=80 is interpolation or extrapolation if data range is 2 to 15.
A line of best fit is y=12.4−0.75x. Find the predicted value at x=8 and explain whether prediction at x=80 is interpolation or extrapolation if data range is 2 to 15.
A line of best fit is y=12.4−0.75x. Find the predicted value at x=8 and explain whether prediction at x=80 is interpolation or extrapolation if data range is 2 to 15.
A line of best fit is y=12.4−0.75x. Find the predicted value at x=8 and explain whether prediction at x=80 is interpolation or extrapolation if data range is 2 to 15.
A line of best fit is y=12.4−0.75x. Find the predicted value at x=8 and explain whether prediction at x=80 is interpolation or extrapolation if data range is 2 to 15.
A line of best fit is y=12.4−0.75x. Find the predicted value at x=8 and explain whether prediction at x=80 is interpolation or extrapolation if data range is 2 to 15.
A line of best fit is y=12.4−0.75x. Find the predicted value at x=8 and explain whether prediction at x=80 is interpolation or extrapolation if data range is 2 to 15.
Given Σx=70, Σy=40, n=10, calculate x̄ and ȳ and state their relationship to the least-squares line.
Given Σx=80, Σy=70, n=10, calculate x̄ and ȳ and state their relationship to the least-squares line.
Given Σx=90, Σy=30, n=10, calculate x̄ and ȳ and state their relationship to the least-squares line.
Given Σx=100, Σy=60, n=10, calculate x̄ and ȳ and state their relationship to the least-squares line.
Given Σx=20, Σy=20, n=10, calculate x̄ and ȳ and state their relationship to the least-squares line.
Given Σx=30, Σy=50, n=10, calculate x̄ and ȳ and state their relationship to the least-squares line.
Given Σx=40, Σy=10, n=10, calculate x̄ and ȳ and state their relationship to the least-squares line.
Given Σx=50, Σy=40, n=10, calculate x̄ and ȳ and state their relationship to the least-squares line.
Given Σx=60, Σy=70, n=10, calculate x̄ and ȳ and state their relationship to the least-squares line.
Given Σx=70, Σy=30, n=10, calculate x̄ and ȳ and state their relationship to the least-squares line.
A residual plot shows residuals increasing systematically with x. Explain what this suggests about the suitability of a linear model.
A residual plot shows residuals increasing systematically with x. Explain what this suggests about the suitability of a linear model.
A residual plot shows residuals increasing systematically with x. Explain what this suggests about the suitability of a linear model.
A residual plot shows residuals increasing systematically with x. Explain what this suggests about the suitability of a linear model.
A residual plot shows residuals increasing systematically with x. Explain what this suggests about the suitability of a linear model.
A residual plot shows residuals increasing systematically with x. Explain what this suggests about the suitability of a linear model.
A residual plot shows residuals increasing systematically with x. Explain what this suggests about the suitability of a linear model.
A residual plot shows residuals increasing systematically with x. Explain what this suggests about the suitability of a linear model.
A residual plot shows residuals increasing systematically with x. Explain what this suggests about the suitability of a linear model.
A residual plot shows residuals increasing systematically with x. Explain what this suggests about the suitability of a linear model.
12. Calculus: limits and differentiation
Scope: Limits, derivatives, tangents, rates, stationary points, curve behaviour and HL extensions. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 12
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. Evaluate lim(x→2)(x²+3x−10)/(x−2).
- Direct substitution gives 0/0, so factorise the numerator.
- x²+3x−10=(x+5)(x−2).
- For x≠2, cancel the common factor x−2, leaving x+5.
- Evaluate the limit as x approaches 2: 2+5=7. Answer: 7.
Worked problem 2. Differentiate f(x)=3x⁴−5x²+7x−2.
- Apply the power rule d/dx(xⁿ)=nxⁿ⁻¹ to each term.
- d/dx(3x⁴)=12x³.
- d/dx(−5x²)=−10x; d/dx(7x)=7.
- The derivative of the constant −2 is zero. Answer: f′(x)=12x³−10x+7.
Worked problem 3. Find the gradient of y=x²−4x+1 at x=3 and the equation of the tangent.
- Differentiate y=x²−4x+1 to get dy/dx=2x−4.
- At x=3, gradient=2(3)−4=2.
- Find the point: y=9−12+1=−2, so point (3,−2).
- Use point-gradient form: y+2=2(x−3).
- Simplify. Answer: tangent y=2x−8.
Worked problem 4. A curve is y=x³−6x²+9x. Find stationary points and classify them.
- Differentiate: y′=3x²−12x+9.
- Set y′=0: 3(x²−4x+3)=0, so (x−1)(x−3)=0; x=1 or 3.
- Find coordinates: y(1)=1−6+9=4; y(3)=27−54+27=0.
- Second derivative y″=6x−12. At x=1, y″=−6<0 (local maximum); at x=3, y″=6>0 (local minimum). Answer: maximum (1,4), minimum (3,0).
Worked problem 5. Use first principles to differentiate f(x)=x².
- Start with the first-principles definition f′(x)=lim(h→0)[f(x+h)−f(x)]/h.
- For f(x)=x², f(x+h)=(x+h)²=x²+2xh+h².
- Subtract f(x): 2xh+h².
- Divide by h: 2x+h.
- Take the limit as h→0. Answer: f′(x)=2x.
Mock questions — 70 questions
Differentiate f(x)=2x³−2x²+3x−4 and evaluate f'(2).
Differentiate f(x)=3x³−8x²+8x−4 and evaluate f'(3).
Differentiate f(x)=4x³−14x²+13x−4 and evaluate f'(4).
Differentiate f(x)=5x³−6x²+7x−4 and evaluate f'(5).
Differentiate f(x)=6x³−12x²+12x−4 and evaluate f'(6).
Differentiate f(x)=7x³−4x²+6x−4 and evaluate f'(7).
Differentiate f(x)=8x³−10x²+11x−4 and evaluate f'(8).
Differentiate f(x)=9x³−2x²+5x−4 and evaluate f'(9).
Differentiate f(x)=10x³−8x²+10x−4 and evaluate f'(10).
Differentiate f(x)=2x³−14x²+4x−4 and evaluate f'(2).
Find the stationary points of y=x³−9x²+21x, classify them using the second derivative.
Find the stationary points of y=x³−12x²+36x, classify them using the second derivative.
Find the stationary points of y=x³−15x²+55x, classify them using the second derivative.
Find the stationary points of y=x³−18x²+78x, classify them using the second derivative.
Find the stationary points of y=x³−21x²+105x, classify them using the second derivative.
Find the stationary points of y=x³−24x²+136x, classify them using the second derivative.
Find the stationary points of y=x³−27x²+171x, classify them using the second derivative.
Find the stationary points of y=x³−30x²+210x, classify them using the second derivative.
Find the stationary points of y=x³−6x²+10x, classify them using the second derivative.
Find the stationary points of y=x³−9x²+21x, classify them using the second derivative.
Find the equation of the tangent to y=x²+4x at x=5.
Find the equation of the tangent to y=x²+5x at x=1.
Find the equation of the tangent to y=x²+6x at x=4.
Find the equation of the tangent to y=x²+7x at x=7.
Find the equation of the tangent to y=x²+8x at x=3.
Find the equation of the tangent to y=x²+9x at x=6.
Find the equation of the tangent to y=x²+10x at x=2.
Find the equation of the tangent to y=x²+2x at x=5.
Find the equation of the tangent to y=x²+3x at x=1.
Find the equation of the tangent to y=x²+4x at x=4.
Evaluate lim(x→5) (x²−25)/(x−5) and explain the algebraic simplification.
Evaluate lim(x→6) (x²−36)/(x−6) and explain the algebraic simplification.
Evaluate lim(x→7) (x²−49)/(x−7) and explain the algebraic simplification.
Evaluate lim(x→8) (x²−64)/(x−8) and explain the algebraic simplification.
Evaluate lim(x→9) (x²−81)/(x−9) and explain the algebraic simplification.
Evaluate lim(x→10) (x²−100)/(x−10) and explain the algebraic simplification.
Evaluate lim(x→2) (x²−4)/(x−2) and explain the algebraic simplification.
Evaluate lim(x→3) (x²−9)/(x−3) and explain the algebraic simplification.
Evaluate lim(x→4) (x²−16)/(x−4) and explain the algebraic simplification.
Evaluate lim(x→5) (x²−25)/(x−5) and explain the algebraic simplification.
A particle has displacement s(t)=t³−12t²+6t. Find velocity and acceleration at t=2.
A particle has displacement s(t)=t³−14t²+15t. Find velocity and acceleration at t=2.
A particle has displacement s(t)=t³−16t²+3t. Find velocity and acceleration at t=2.
A particle has displacement s(t)=t³−18t²+12t. Find velocity and acceleration at t=2.
A particle has displacement s(t)=t³−20t²+21t. Find velocity and acceleration at t=2.
A particle has displacement s(t)=t³−4t²+9t. Find velocity and acceleration at t=2.
A particle has displacement s(t)=t³−6t²+18t. Find velocity and acceleration at t=2.
A particle has displacement s(t)=t³−8t²+6t. Find velocity and acceleration at t=2.
A particle has displacement s(t)=t³−10t²+15t. Find velocity and acceleration at t=2.
A particle has displacement s(t)=t³−12t²+3t. Find velocity and acceleration at t=2.
For f(x)=x⁴−4x², find f'(x), solve f'(x)=0 and identify stationary x-values.
For f(x)=x⁴−4x², find f'(x), solve f'(x)=0 and identify stationary x-values.
For f(x)=x⁴−4x², find f'(x), solve f'(x)=0 and identify stationary x-values.
For f(x)=x⁴−4x², find f'(x), solve f'(x)=0 and identify stationary x-values.
For f(x)=x⁴−4x², find f'(x), solve f'(x)=0 and identify stationary x-values.
For f(x)=x⁴−4x², find f'(x), solve f'(x)=0 and identify stationary x-values.
For f(x)=x⁴−4x², find f'(x), solve f'(x)=0 and identify stationary x-values.
For f(x)=x⁴−4x², find f'(x), solve f'(x)=0 and identify stationary x-values.
For f(x)=x⁴−4x², find f'(x), solve f'(x)=0 and identify stationary x-values.
For f(x)=x⁴−4x², find f'(x), solve f'(x)=0 and identify stationary x-values.
The curve y=x²+16x+6 has a tangent parallel to y=24x. Find the point(s) of contact.
The curve y=x²+18x+2 has a tangent parallel to y=27x. Find the point(s) of contact.
The curve y=x²+20x+5 has a tangent parallel to y=30x. Find the point(s) of contact.
The curve y=x²+4x+1 has a tangent parallel to y=6x. Find the point(s) of contact.
The curve y=x²+6x+4 has a tangent parallel to y=9x. Find the point(s) of contact.
The curve y=x²+8x+7 has a tangent parallel to y=12x. Find the point(s) of contact.
The curve y=x²+10x+3 has a tangent parallel to y=15x. Find the point(s) of contact.
The curve y=x²+12x+6 has a tangent parallel to y=18x. Find the point(s) of contact.
The curve y=x²+14x+2 has a tangent parallel to y=21x. Find the point(s) of contact.
The curve y=x²+16x+5 has a tangent parallel to y=24x. Find the point(s) of contact.
13. Calculus: integration and applications
Scope: Antiderivatives, definite integrals, areas, accumulation and volume/application tasks where prescribed. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 13
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. Evaluate ∫(6x²−4x+3) dx.
- Integrate each term separately using ∫xⁿdx=xⁿ⁺¹/(n+1)+C.
- ∫6x²dx=2x³.
- ∫−4x dx=−2x² and ∫3dx=3x.
- Add the constant of integration. Answer: 2x³−2x²+3x+C.
Worked problem 2. Find the area enclosed by y=4−x² and the x-axis.
- Find where the curve meets the x-axis: 4−x²=0 gives x=−2 and x=2.
- The curve is above the axis between these roots, so area is ∫₋₂²(4−x²)dx.
- Antiderivative is 4x−x³/3.
- Evaluate: at 2, 8−8/3=16/3; at −2, −8+8/3=−16/3.
- Subtract: 16/3−(−16/3)=32/3. Answer: 32/3 square units.
Worked problem 3. A particle has velocity v(t)=3t²−12t+9. Find displacement from t=0 to t=4.
- Displacement is the definite integral of velocity: Δs=∫₀⁴(3t²−12t+9)dt.
- Integrate: t³−6t²+9t.
- Evaluate at t=4: 64−96+36=4.
- At t=0 the expression is 0.
- Subtract upper minus lower. Answer: displacement=4 units.
Worked problem 4. Evaluate ∫₁³(2x+1)dx.
- Find an antiderivative: ∫(2x+1)dx=x²+x.
- Evaluate at the upper limit 3: 9+3=12.
- Evaluate at the lower limit 1: 1+1=2.
- Subtract: 12−2=10. Answer: 10.
Worked problem 5. The curve y=2x has area under it from x=0 to x=5. Find the area.
- Area under y=2x from 0 to 5 is ∫₀⁵2x dx.
- Antiderivative is x².
- Evaluate at 5: 25.
- Evaluate at 0: 0.
- Subtract. Answer: 25 square units.
Mock questions — 70 questions
Evaluate ∫( 2x²−1x+3) dx and verify by differentiation.
Evaluate ∫( 3x²−4x+8) dx and verify by differentiation.
Evaluate ∫( 4x²−7x+13) dx and verify by differentiation.
Evaluate ∫( 5x²−3x+7) dx and verify by differentiation.
Evaluate ∫( 6x²−6x+12) dx and verify by differentiation.
Evaluate ∫( 7x²−2x+6) dx and verify by differentiation.
Evaluate ∫( 8x²−5x+11) dx and verify by differentiation.
Evaluate ∫( 9x²−1x+5) dx and verify by differentiation.
Evaluate ∫( 10x²−4x+10) dx and verify by differentiation.
Evaluate ∫( 2x²−7x+4) dx and verify by differentiation.
Evaluate ∫₀² (3x+3) dx.
Evaluate ∫₀² (4x+6) dx.
Evaluate ∫₀² (5x+2) dx.
Evaluate ∫₀² (6x+5) dx.
Evaluate ∫₀² (7x+1) dx.
Evaluate ∫₀² (8x+4) dx.
Evaluate ∫₀² (9x+7) dx.
Evaluate ∫₀² (10x+3) dx.
Evaluate ∫₀² (2x+6) dx.
Evaluate ∫₀² (3x+2) dx.
Find the area enclosed by y=4x and y=x² between their points of intersection.
Find the area enclosed by y=5x and y=x² between their points of intersection.
Find the area enclosed by y=6x and y=x² between their points of intersection.
Find the area enclosed by y=7x and y=x² between their points of intersection.
Find the area enclosed by y=8x and y=x² between their points of intersection.
Find the area enclosed by y=9x and y=x² between their points of intersection.
Find the area enclosed by y=10x and y=x² between their points of intersection.
Find the area enclosed by y=2x and y=x² between their points of intersection.
Find the area enclosed by y=3x and y=x² between their points of intersection.
Find the area enclosed by y=4x and y=x² between their points of intersection.
Evaluate ∫2x(x²+5)³ dx using substitution.
Evaluate ∫2x(x²+6)³ dx using substitution.
Evaluate ∫2x(x²+7)³ dx using substitution.
Evaluate ∫2x(x²+8)³ dx using substitution.
Evaluate ∫2x(x²+9)³ dx using substitution.
Evaluate ∫2x(x²+10)³ dx using substitution.
Evaluate ∫2x(x²+2)³ dx using substitution.
Evaluate ∫2x(x²+3)³ dx using substitution.
Evaluate ∫2x(x²+4)³ dx using substitution.
Evaluate ∫2x(x²+5)³ dx using substitution.
A velocity is v(t)=3t²−12t. Find displacement from t=0 to t=2 and interpret the sign.
A velocity is v(t)=3t²−14t. Find displacement from t=0 to t=5 and interpret the sign.
A velocity is v(t)=3t²−16t. Find displacement from t=0 to t=1 and interpret the sign.
A velocity is v(t)=3t²−18t. Find displacement from t=0 to t=4 and interpret the sign.
A velocity is v(t)=3t²−20t. Find displacement from t=0 to t=7 and interpret the sign.
A velocity is v(t)=3t²−4t. Find displacement from t=0 to t=3 and interpret the sign.
A velocity is v(t)=3t²−6t. Find displacement from t=0 to t=6 and interpret the sign.
A velocity is v(t)=3t²−8t. Find displacement from t=0 to t=2 and interpret the sign.
A velocity is v(t)=3t²−10t. Find displacement from t=0 to t=5 and interpret the sign.
A velocity is v(t)=3t²−12t. Find displacement from t=0 to t=1 and interpret the sign.
Find the area between y=x² and y=14x for x=0 to x=14.
Find the area between y=x² and y=16x for x=0 to x=16.
Find the area between y=x² and y=18x for x=0 to x=18.
Find the area between y=x² and y=20x for x=0 to x=20.
Find the area between y=x² and y=4x for x=0 to x=4.
Find the area between y=x² and y=6x for x=0 to x=6.
Find the area between y=x² and y=8x for x=0 to x=8.
Find the area between y=x² and y=10x for x=0 to x=10.
Find the area between y=x² and y=12x for x=0 to x=12.
Find the area between y=x² and y=14x for x=0 to x=14.
Given dy/dx=2x+8, y=4 when x=1, find y as a function of x.
Given dy/dx=2x+9, y=4 when x=1, find y as a function of x.
Given dy/dx=2x+10, y=4 when x=1, find y as a function of x.
Given dy/dx=2x+2, y=4 when x=1, find y as a function of x.
Given dy/dx=2x+3, y=4 when x=1, find y as a function of x.
Given dy/dx=2x+4, y=4 when x=1, find y as a function of x.
Given dy/dx=2x+5, y=4 when x=1, find y as a function of x.
Given dy/dx=2x+6, y=4 when x=1, find y as a function of x.
Given dy/dx=2x+7, y=4 when x=1, find y as a function of x.
Given dy/dx=2x+8, y=4 when x=1, find y as a function of x.
14. Optimisation and rates of change
Scope: Constraints, objective functions, marginal rates, related rates and interpretation of optima. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 14
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. A rectangle has perimeter 48 m. Find dimensions for maximum area.
- Let the rectangle sides be x and y. Perimeter 48 gives 2x+2y=48, hence y=24−x.
- Area A=xy=x(24−x)=24x−x².
- Complete the square: A=−(x−12)²+144.
- Since the squared term is non-negative and has a negative coefficient, the maximum is 144 when x=12.
- y=24−12=12. Answer: 12 m by 12 m; maximum area 144 m².
Worked problem 2. A particle's displacement is s(t)=t³−6t²+9t. Find velocity and acceleration at t=2.
- Velocity is the derivative of displacement: v(t)=s′(t)=3t²−12t+9.
- Acceleration is derivative of velocity: a(t)=v′(t)=6t−12.
- Substitute t=2 into velocity: 12−24+9=−3.
- Substitute t=2 into acceleration: 12−12=0. Answer: v(2)=−3 units/time and a(2)=0 units/time².
Worked problem 3. A cylindrical can has fixed volume 500 cm³. Write its surface area in terms of radius r and find the stationary condition.
- Cylinder volume is V=πr²h=500, so h=500/(πr²).
- Total surface area S=2πr²+2πrh.
- Substitute h: S=2πr²+2πr[500/(πr²)]=2πr²+1000/r.
- Differentiate: dS/dr=4πr−1000r⁻².
- Set derivative to zero: 4πr−1000/r²=0, so 4πr³=1000.
- r³=250/π, hence r=∛(250/π)≈4.30 cm. Answer: stationary radius approximately 4.30 cm.
Worked problem 4. A company has revenue R(x)=80x−2x² and cost C(x)=10x+100. Find the output that maximises profit.
- Profit P=Revenue−Cost.
- P(x)=(80x−2x²)−(10x+100)=−2x²+70x−100.
- This quadratic opens downwards because a=−2, so its vertex is a maximum.
- Vertex x=−b/(2a)=−70/[2(−2)]=17.5. Answer: maximum profit occurs at output 17.5 units (if output is continuous; if whole units are required, compare 17 and 18).
Worked problem 5. A water level rises according to h(t)=0.5t²+2t. Find the rate of rise at t=6.
- The instantaneous rate of rise is dh/dt.
- Differentiate h(t)=0.5t²+2t to get dh/dt=t+2.
- Substitute t=6: 6+2=8.
- Attach the context units: height units per time unit. Answer: rate of rise is 8 units per time.
Mock questions — 70 questions
A rectangular enclosure has perimeter 40 m. Express its area in terms of one side and find the dimensions giving maximum area.
A rectangular enclosure has perimeter 60 m. Express its area in terms of one side and find the dimensions giving maximum area.
A rectangular enclosure has perimeter 80 m. Express its area in terms of one side and find the dimensions giving maximum area.
A rectangular enclosure has perimeter 100 m. Express its area in terms of one side and find the dimensions giving maximum area.
A rectangular enclosure has perimeter 120 m. Express its area in terms of one side and find the dimensions giving maximum area.
A rectangular enclosure has perimeter 140 m. Express its area in terms of one side and find the dimensions giving maximum area.
A rectangular enclosure has perimeter 160 m. Express its area in terms of one side and find the dimensions giving maximum area.
A rectangular enclosure has perimeter 180 m. Express its area in terms of one side and find the dimensions giving maximum area.
A rectangular enclosure has perimeter 200 m. Express its area in terms of one side and find the dimensions giving maximum area.
A rectangular enclosure has perimeter 40 m. Express its area in terms of one side and find the dimensions giving maximum area.
An open-top box is made by cutting squares of side x cm from a 30 cm by 30 cm sheet. Form a volume function and state its physical domain.
An open-top box is made by cutting squares of side x cm from a 40 cm by 60 cm sheet. Form a volume function and state its physical domain.
An open-top box is made by cutting squares of side x cm from a 50 cm by 20 cm sheet. Form a volume function and state its physical domain.
An open-top box is made by cutting squares of side x cm from a 60 cm by 50 cm sheet. Form a volume function and state its physical domain.
An open-top box is made by cutting squares of side x cm from a 70 cm by 10 cm sheet. Form a volume function and state its physical domain.
An open-top box is made by cutting squares of side x cm from a 80 cm by 40 cm sheet. Form a volume function and state its physical domain.
An open-top box is made by cutting squares of side x cm from a 90 cm by 70 cm sheet. Form a volume function and state its physical domain.
An open-top box is made by cutting squares of side x cm from a 100 cm by 30 cm sheet. Form a volume function and state its physical domain.
An open-top box is made by cutting squares of side x cm from a 20 cm by 60 cm sheet. Form a volume function and state its physical domain.
An open-top box is made by cutting squares of side x cm from a 30 cm by 20 cm sheet. Form a volume function and state its physical domain.
A particle's displacement is s=t³−12t²+20t. Find the time(s) when its velocity is zero and its acceleration then.
A particle's displacement is s=t³−15t²+4t. Find the time(s) when its velocity is zero and its acceleration then.
A particle's displacement is s=t³−18t²+16t. Find the time(s) when its velocity is zero and its acceleration then.
A particle's displacement is s=t³−21t²+28t. Find the time(s) when its velocity is zero and its acceleration then.
A particle's displacement is s=t³−24t²+12t. Find the time(s) when its velocity is zero and its acceleration then.
A particle's displacement is s=t³−27t²+24t. Find the time(s) when its velocity is zero and its acceleration then.
A particle's displacement is s=t³−30t²+8t. Find the time(s) when its velocity is zero and its acceleration then.
A particle's displacement is s=t³−6t²+20t. Find the time(s) when its velocity is zero and its acceleration then.
A particle's displacement is s=t³−9t²+4t. Find the time(s) when its velocity is zero and its acceleration then.
A particle's displacement is s=t³−12t²+16t. Find the time(s) when its velocity is zero and its acceleration then.
A cylindrical can has fixed volume 500π cm³. Express surface area in terms of radius and determine the radius that minimises material, showing calculus.
A cylindrical can has fixed volume 600π cm³. Express surface area in terms of radius and determine the radius that minimises material, showing calculus.
A cylindrical can has fixed volume 700π cm³. Express surface area in terms of radius and determine the radius that minimises material, showing calculus.
A cylindrical can has fixed volume 800π cm³. Express surface area in terms of radius and determine the radius that minimises material, showing calculus.
A cylindrical can has fixed volume 900π cm³. Express surface area in terms of radius and determine the radius that minimises material, showing calculus.
A cylindrical can has fixed volume 1000π cm³. Express surface area in terms of radius and determine the radius that minimises material, showing calculus.
A cylindrical can has fixed volume 200π cm³. Express surface area in terms of radius and determine the radius that minimises material, showing calculus.
A cylindrical can has fixed volume 300π cm³. Express surface area in terms of radius and determine the radius that minimises material, showing calculus.
A cylindrical can has fixed volume 400π cm³. Express surface area in terms of radius and determine the radius that minimises material, showing calculus.
A cylindrical can has fixed volume 500π cm³. Express surface area in terms of radius and determine the radius that minimises material, showing calculus.
A company models profit by P(x)=−2x²+120x−100. Find the production level that maximises profit and the maximum profit.
A company models profit by P(x)=−2x²+140x−250. Find the production level that maximises profit and the maximum profit.
A company models profit by P(x)=−2x²+160x−50. Find the production level that maximises profit and the maximum profit.
A company models profit by P(x)=−2x²+180x−200. Find the production level that maximises profit and the maximum profit.
A company models profit by P(x)=−2x²+200x−350. Find the production level that maximises profit and the maximum profit.
A company models profit by P(x)=−2x²+40x−150. Find the production level that maximises profit and the maximum profit.
A company models profit by P(x)=−2x²+60x−300. Find the production level that maximises profit and the maximum profit.
A company models profit by P(x)=−2x²+80x−100. Find the production level that maximises profit and the maximum profit.
A company models profit by P(x)=−2x²+100x−250. Find the production level that maximises profit and the maximum profit.
A company models profit by P(x)=−2x²+120x−50. Find the production level that maximises profit and the maximum profit.
A ladder of length 12 m leans against a wall. Its foot moves away at 2 m/s when 3 m from the wall. Find the rate the top descends at that instant.
A ladder of length 13 m leans against a wall. Its foot moves away at 3.5 m/s when 3 m from the wall. Find the rate the top descends at that instant.
A ladder of length 14 m leans against a wall. Its foot moves away at 1.5 m/s when 3 m from the wall. Find the rate the top descends at that instant.
A ladder of length 15 m leans against a wall. Its foot moves away at 3 m/s when 3 m from the wall. Find the rate the top descends at that instant.
A ladder of length 7 m leans against a wall. Its foot moves away at 1 m/s when 3 m from the wall. Find the rate the top descends at that instant.
A ladder of length 8 m leans against a wall. Its foot moves away at 2.5 m/s when 3 m from the wall. Find the rate the top descends at that instant.
A ladder of length 9 m leans against a wall. Its foot moves away at 0.5 m/s when 3 m from the wall. Find the rate the top descends at that instant.
A ladder of length 10 m leans against a wall. Its foot moves away at 2 m/s when 3 m from the wall. Find the rate the top descends at that instant.
A ladder of length 11 m leans against a wall. Its foot moves away at 3.5 m/s when 3 m from the wall. Find the rate the top descends at that instant.
A ladder of length 12 m leans against a wall. Its foot moves away at 1.5 m/s when 3 m from the wall. Find the rate the top descends at that instant.
A rectangle has area 288 cm². Find the dimensions that minimise its perimeter and justify the result.
A rectangle has area 324 cm². Find the dimensions that minimise its perimeter and justify the result.
A rectangle has area 360 cm². Find the dimensions that minimise its perimeter and justify the result.
A rectangle has area 72 cm². Find the dimensions that minimise its perimeter and justify the result.
A rectangle has area 108 cm². Find the dimensions that minimise its perimeter and justify the result.
A rectangle has area 144 cm². Find the dimensions that minimise its perimeter and justify the result.
A rectangle has area 180 cm². Find the dimensions that minimise its perimeter and justify the result.
A rectangle has area 216 cm². Find the dimensions that minimise its perimeter and justify the result.
A rectangle has area 252 cm². Find the dimensions that minimise its perimeter and justify the result.
A rectangle has area 288 cm². Find the dimensions that minimise its perimeter and justify the result.
15. Technology-supported mathematical exploration
Scope: Calculator/CAS-supported regression, numerical solving, graph analysis, parameter fitting and error evaluation. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 15
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. A rectangular plot has fixed area 200 m². If width is x, express fencing perimeter as a function of x.
- Area=length×width=200, so if width=x, length=200/x.
- Perimeter P=2(length+width).
- Substitute: P(x)=2(200/x+x)=400/x+2x.
- Since a length must be positive, x>0. Answer: P(x)=2x+400/x, x>0.
Worked problem 2. A population model is P(t)=1200e^(0.035t). Find the instantaneous growth rate at t=10.
- Differentiate P(t)=1200e^(0.035t) using d/dt(e^(kt))=ke^(kt).
- P′(t)=1200(0.035)e^(0.035t)=42e^(0.035t).
- Substitute t=10: P′(10)=42e^0.35.
- Evaluate: e^0.35≈1.4191, so rate≈42×1.4191=59.6. Answer: approximately 59.6 people per year.
Worked problem 3. A cooling model is T(t)=22+68e^(−0.18t). Find T(5).
- Substitute t=5 into T(t)=22+68e^(−0.18t).
- Calculate exponent: −0.18×5=−0.9.
- Evaluate e^−0.9≈0.40657.
- T(5)=22+68(0.40657)≈22+27.65=49.65°C. Answer: approximately 49.6°C.
Worked problem 4. A square sheet of side 30 cm has equal squares of side x cut from corners and is folded into an open box. Write its volume function.
- Original sheet side length is 30 cm.
- Cutting a square of side x from each corner removes x from both ends of each side, leaving base length 30−2x and width 30−2x.
- Folding creates height x.
- Volume=length×width×height. Answer: V(x)=x(30−2x)², with physical domain 0
Worked problem 5. For a model C(t)=500/(1+4e^(−0.6t)), find its limiting value as t→∞ and interpret it.
- Consider C(t)=500/[1+4e^(−0.6t)].
- As t→∞, the exponent −0.6t→−∞, so e^(−0.6t)→0.
- The denominator tends to 1+4(0)=1.
- Therefore C(t)→500/1=500. Answer: the model approaches a limiting value or carrying capacity of 500 units.
Mock questions — 70 questions
Use a graphing tool to solve x³−2x−1=0 to 3 decimal places. State the interval used to isolate the root and verify by substitution.
Use a graphing tool to solve x³−3x−4=0 to 3 decimal places. State the interval used to isolate the root and verify by substitution.
Use a graphing tool to solve x³−4x−7=0 to 3 decimal places. State the interval used to isolate the root and verify by substitution.
Use a graphing tool to solve x³−5x−3=0 to 3 decimal places. State the interval used to isolate the root and verify by substitution.
Use a graphing tool to solve x³−6x−6=0 to 3 decimal places. State the interval used to isolate the root and verify by substitution.
Use a graphing tool to solve x³−7x−2=0 to 3 decimal places. State the interval used to isolate the root and verify by substitution.
Use a graphing tool to solve x³−8x−5=0 to 3 decimal places. State the interval used to isolate the root and verify by substitution.
Use a graphing tool to solve x³−9x−1=0 to 3 decimal places. State the interval used to isolate the root and verify by substitution.
Use a graphing tool to solve x³−10x−4=0 to 3 decimal places. State the interval used to isolate the root and verify by substitution.
Use a graphing tool to solve x³−2x−7=0 to 3 decimal places. State the interval used to isolate the root and verify by substitution.
Fit a linear regression model to (1,3), (2,5), (3,8), (4,10). Report gradient, intercept and r to 3 significant figures.
Fit a linear regression model to (1,4), (2,6), (3,9), (4,11). Report gradient, intercept and r to 3 significant figures.
Fit a linear regression model to (1,5), (2,7), (3,10), (4,12). Report gradient, intercept and r to 3 significant figures.
Fit a linear regression model to (1,6), (2,8), (3,11), (4,13). Report gradient, intercept and r to 3 significant figures.
Fit a linear regression model to (1,7), (2,9), (3,12), (4,14). Report gradient, intercept and r to 3 significant figures.
Fit a linear regression model to (1,8), (2,10), (3,13), (4,15). Report gradient, intercept and r to 3 significant figures.
Fit a linear regression model to (1,9), (2,11), (3,14), (4,16). Report gradient, intercept and r to 3 significant figures.
Fit a linear regression model to (1,10), (2,12), (3,15), (4,17). Report gradient, intercept and r to 3 significant figures.
Fit a linear regression model to (1,2), (2,4), (3,7), (4,9). Report gradient, intercept and r to 3 significant figures.
Fit a linear regression model to (1,3), (2,5), (3,8), (4,10). Report gradient, intercept and r to 3 significant figures.
Use numerical integration (trapezoidal rule with 4 equal strips) to estimate ∫₀⁴ (x²+4) dx. Show the table of ordinates.
Use numerical integration (trapezoidal rule with 4 equal strips) to estimate ∫₀⁴ (x²+5) dx. Show the table of ordinates.
Use numerical integration (trapezoidal rule with 4 equal strips) to estimate ∫₀⁴ (x²+6) dx. Show the table of ordinates.
Use numerical integration (trapezoidal rule with 4 equal strips) to estimate ∫₀⁴ (x²+7) dx. Show the table of ordinates.
Use numerical integration (trapezoidal rule with 4 equal strips) to estimate ∫₀⁴ (x²+8) dx. Show the table of ordinates.
Use numerical integration (trapezoidal rule with 4 equal strips) to estimate ∫₀⁴ (x²+9) dx. Show the table of ordinates.
Use numerical integration (trapezoidal rule with 4 equal strips) to estimate ∫₀⁴ (x²+10) dx. Show the table of ordinates.
Use numerical integration (trapezoidal rule with 4 equal strips) to estimate ∫₀⁴ (x²+2) dx. Show the table of ordinates.
Use numerical integration (trapezoidal rule with 4 equal strips) to estimate ∫₀⁴ (x²+3) dx. Show the table of ordinates.
Use numerical integration (trapezoidal rule with 4 equal strips) to estimate ∫₀⁴ (x²+4) dx. Show the table of ordinates.
Graph y=x²−20 and y=7x−10. Use intersections to solve the resulting equation numerically and check algebraically.
Graph y=x²−24 and y=3x−4. Use intersections to solve the resulting equation numerically and check algebraically.
Graph y=x²−28 and y=6x−9. Use intersections to solve the resulting equation numerically and check algebraically.
Graph y=x²−32 and y=2x−3. Use intersections to solve the resulting equation numerically and check algebraically.
Graph y=x²−36 and y=5x−8. Use intersections to solve the resulting equation numerically and check algebraically.
Graph y=x²−40 and y=1x−13. Use intersections to solve the resulting equation numerically and check algebraically.
Graph y=x²−8 and y=4x−7. Use intersections to solve the resulting equation numerically and check algebraically.
Graph y=x²−12 and y=7x−12. Use intersections to solve the resulting equation numerically and check algebraically.
Graph y=x²−16 and y=3x−6. Use intersections to solve the resulting equation numerically and check algebraically.
Graph y=x²−20 and y=6x−11. Use intersections to solve the resulting equation numerically and check algebraically.
A regression calculator gives r=-0.80. Explain the direction/strength and identify one diagnostic plot needed before trusting prediction.
A regression calculator gives r=-0.85. Explain the direction/strength and identify one diagnostic plot needed before trusting prediction.
A regression calculator gives r=-0.90. Explain the direction/strength and identify one diagnostic plot needed before trusting prediction.
A regression calculator gives r=-0.95. Explain the direction/strength and identify one diagnostic plot needed before trusting prediction.
A regression calculator gives r=-1.00. Explain the direction/strength and identify one diagnostic plot needed before trusting prediction.
A regression calculator gives r=-0.60. Explain the direction/strength and identify one diagnostic plot needed before trusting prediction.
A regression calculator gives r=-0.65. Explain the direction/strength and identify one diagnostic plot needed before trusting prediction.
A regression calculator gives r=-0.70. Explain the direction/strength and identify one diagnostic plot needed before trusting prediction.
A regression calculator gives r=-0.75. Explain the direction/strength and identify one diagnostic plot needed before trusting prediction.
A regression calculator gives r=-0.80. Explain the direction/strength and identify one diagnostic plot needed before trusting prediction.
Use technology to find the intersection of y=e^(0.2x) and y=7+0.8x on 0≤x≤10. Report roots to 3 d.p. and discuss uniqueness.
Use technology to find the intersection of y=e^(0.2x) and y=8+1.4x on 0≤x≤10. Report roots to 3 d.p. and discuss uniqueness.
Use technology to find the intersection of y=e^(0.2x) and y=9+0.6x on 0≤x≤10. Report roots to 3 d.p. and discuss uniqueness.
Use technology to find the intersection of y=e^(0.2x) and y=10+1.2x on 0≤x≤10. Report roots to 3 d.p. and discuss uniqueness.
Use technology to find the intersection of y=e^(0.2x) and y=2+0.4x on 0≤x≤10. Report roots to 3 d.p. and discuss uniqueness.
Use technology to find the intersection of y=e^(0.2x) and y=3+1x on 0≤x≤10. Report roots to 3 d.p. and discuss uniqueness.
Use technology to find the intersection of y=e^(0.2x) and y=4+0.2x on 0≤x≤10. Report roots to 3 d.p. and discuss uniqueness.
Use technology to find the intersection of y=e^(0.2x) and y=5+0.8x on 0≤x≤10. Report roots to 3 d.p. and discuss uniqueness.
Use technology to find the intersection of y=e^(0.2x) and y=6+1.4x on 0≤x≤10. Report roots to 3 d.p. and discuss uniqueness.
Use technology to find the intersection of y=e^(0.2x) and y=7+0.6x on 0≤x≤10. Report roots to 3 d.p. and discuss uniqueness.
A data model predicts 100 when observed value is 97. Calculate the residual and percentage error; comment on model fit.
A data model predicts 110 when observed value is 107. Calculate the residual and percentage error; comment on model fit.
A data model predicts 120 when observed value is 117. Calculate the residual and percentage error; comment on model fit.
A data model predicts 40 when observed value is 37. Calculate the residual and percentage error; comment on model fit.
A data model predicts 50 when observed value is 47. Calculate the residual and percentage error; comment on model fit.
A data model predicts 60 when observed value is 57. Calculate the residual and percentage error; comment on model fit.
A data model predicts 70 when observed value is 67. Calculate the residual and percentage error; comment on model fit.
A data model predicts 80 when observed value is 77. Calculate the residual and percentage error; comment on model fit.
A data model predicts 90 when observed value is 87. Calculate the residual and percentage error; comment on model fit.
A data model predicts 100 when observed value is 97. Calculate the residual and percentage error; comment on model fit.
16. Mathematical modelling and interpretation
Scope: Formulate, solve, validate and refine models using contextual data, assumptions and units. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 16
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. A graphing calculator gives a root of x³−4x−1=0 near 2.115. Verify the root to 3 d.p. by substitution.
- Define f(x)=x³−4x−1 and test the calculator estimate x=2.115.
- Calculate f(2.115)=2.115³−4(2.115)−1.
- 2.115³≈9.458? and 4(2.115)=8.460, so residual is approximately −0.002 (small, subject to rounding).
- A root to 3 d.p. should be checked by testing the rounded value and nearby values or using a higher-precision solver. Answer: 2.115 is a close numerical estimate; quote the residual and tolerance rather than claiming exact equality.
Worked problem 2. A data set has x̄=12, ȳ=30, sx=4, sy=10 and r=0.75. Find the regression line of y on x.
- The slope of the regression line of y on x is b=r(sy/sx).
- Substitute b=0.75(10/4)=0.75(2.5)=1.875.
- Use ȳ=a+bx̄ to find a: 30=a+1.875(12).
- 1.875×12=22.5, so a=30−22.5=7.5. Answer: regression line y=1.875x+7.5.
Worked problem 3. Use numerical iteration xₙ₊₁=√(10+xₙ), starting x₀=3. Find x₁,x₂,x₃ to 3 d.p.
- Start with x₀=3 and use xₙ₊₁=√(10+xₙ).
- x₁=√(10+3)=√13≈3.606.
- x₂=√(10+3.606)=√13.606≈3.689.
- x₃=√(10+3.689)=√13.689≈3.700. Answer: x₁=3.606, x₂=3.689, x₃=3.700 (3 d.p.).
Worked problem 4. A model gives predicted value 84.6 while the observed value is 90. Find the residual and percentage error relative to observed.
- Define residual as observed−predicted.
- Residual=90−84.6=5.4.
- Percentage error relative to observed value=(|residual|/observed)×100.
- (5.4/90)×100=6%. Answer: residual +5.4; percentage error 6%.
Worked problem 5. A numerical integral estimates ∫₀²e^(−x²)dx as 0.882. Explain how halving the step size helps assess reliability.
- The original numerical integral uses a finite step width h, so the approximation has discretisation error.
- Repeat the same numerical method with step width h/2.
- Compare the two estimates; if the values move closer together as the step is reduced, this is evidence of convergence.
- The difference provides an indication of numerical sensitivity, though a formal error bound depends on the method and smoothness. Answer: halving the step tests convergence and helps judge how many decimal places are justified.
Mock questions — 70 questions
A town's population is modelled by P(t)=2000(1.04)^t. Calculate P(5), then explain one assumption that could fail.
A town's population is modelled by P(t)=3000(1.04)^t. Calculate P(5), then explain one assumption that could fail.
A town's population is modelled by P(t)=4000(1.04)^t. Calculate P(5), then explain one assumption that could fail.
A town's population is modelled by P(t)=5000(1.04)^t. Calculate P(5), then explain one assumption that could fail.
A town's population is modelled by P(t)=6000(1.04)^t. Calculate P(5), then explain one assumption that could fail.
A town's population is modelled by P(t)=7000(1.04)^t. Calculate P(5), then explain one assumption that could fail.
A town's population is modelled by P(t)=8000(1.04)^t. Calculate P(5), then explain one assumption that could fail.
A town's population is modelled by P(t)=9000(1.04)^t. Calculate P(5), then explain one assumption that could fail.
A town's population is modelled by P(t)=10000(1.04)^t. Calculate P(5), then explain one assumption that could fail.
A town's population is modelled by P(t)=2000(1.04)^t. Calculate P(5), then explain one assumption that could fail.
A water tank drains linearly from 3000 L to 300 L in 13 minutes. Construct a model and predict the amount after 6 minutes.
A water tank drains linearly from 4000 L to 600 L in 7 minutes. Construct a model and predict the amount after 6 minutes.
A water tank drains linearly from 5000 L to 200 L in 12 minutes. Construct a model and predict the amount after 6 minutes.
A water tank drains linearly from 6000 L to 500 L in 17 minutes. Construct a model and predict the amount after 6 minutes.
A water tank drains linearly from 7000 L to 100 L in 11 minutes. Construct a model and predict the amount after 6 minutes.
A water tank drains linearly from 8000 L to 400 L in 16 minutes. Construct a model and predict the amount after 6 minutes.
A water tank drains linearly from 9000 L to 700 L in 10 minutes. Construct a model and predict the amount after 6 minutes.
A water tank drains linearly from 10000 L to 300 L in 15 minutes. Construct a model and predict the amount after 6 minutes.
A water tank drains linearly from 2000 L to 600 L in 9 minutes. Construct a model and predict the amount after 6 minutes.
A water tank drains linearly from 3000 L to 200 L in 14 minutes. Construct a model and predict the amount after 6 minutes.
A cooling object follows T(t)=20+12e^(−0.15t). Find its initial temperature and temperature after 10 minutes.
A cooling object follows T(t)=20+15e^(−0.15t). Find its initial temperature and temperature after 10 minutes.
A cooling object follows T(t)=20+18e^(−0.15t). Find its initial temperature and temperature after 10 minutes.
A cooling object follows T(t)=20+21e^(−0.15t). Find its initial temperature and temperature after 10 minutes.
A cooling object follows T(t)=20+24e^(−0.15t). Find its initial temperature and temperature after 10 minutes.
A cooling object follows T(t)=20+27e^(−0.15t). Find its initial temperature and temperature after 10 minutes.
A cooling object follows T(t)=20+30e^(−0.15t). Find its initial temperature and temperature after 10 minutes.
A cooling object follows T(t)=20+6e^(−0.15t). Find its initial temperature and temperature after 10 minutes.
A cooling object follows T(t)=20+9e^(−0.15t). Find its initial temperature and temperature after 10 minutes.
A cooling object follows T(t)=20+12e^(−0.15t). Find its initial temperature and temperature after 10 minutes.
A taxi fare is a fixed $7 plus $3.5 per kilometre. Model the fare and calculate the cost for 15 km.
A taxi fare is a fixed $8 plus $1.5 per kilometre. Model the fare and calculate the cost for 9 km.
A taxi fare is a fixed $9 plus $3 per kilometre. Model the fare and calculate the cost for 14 km.
A taxi fare is a fixed $10 plus $1 per kilometre. Model the fare and calculate the cost for 8 km.
A taxi fare is a fixed $11 plus $2.5 per kilometre. Model the fare and calculate the cost for 13 km.
A taxi fare is a fixed $12 plus $0.5 per kilometre. Model the fare and calculate the cost for 18 km.
A taxi fare is a fixed $4 plus $2 per kilometre. Model the fare and calculate the cost for 12 km.
A taxi fare is a fixed $5 plus $3.5 per kilometre. Model the fare and calculate the cost for 17 km.
A taxi fare is a fixed $6 plus $1.5 per kilometre. Model the fare and calculate the cost for 11 km.
A taxi fare is a fixed $7 plus $3 per kilometre. Model the fare and calculate the cost for 16 km.
A bridge arch is approximated by y=−0.04x²+3x. Find its maximum height and span between ground-level endpoints.
A bridge arch is approximated by y=−0.04x²+3.5x. Find its maximum height and span between ground-level endpoints.
A bridge arch is approximated by y=−0.04x²+4x. Find its maximum height and span between ground-level endpoints.
A bridge arch is approximated by y=−0.04x²+4.5x. Find its maximum height and span between ground-level endpoints.
A bridge arch is approximated by y=−0.04x²+5x. Find its maximum height and span between ground-level endpoints.
A bridge arch is approximated by y=−0.04x²+1x. Find its maximum height and span between ground-level endpoints.
A bridge arch is approximated by y=−0.04x²+1.5x. Find its maximum height and span between ground-level endpoints.
A bridge arch is approximated by y=−0.04x²+2x. Find its maximum height and span between ground-level endpoints.
A bridge arch is approximated by y=−0.04x²+2.5x. Find its maximum height and span between ground-level endpoints.
A bridge arch is approximated by y=−0.04x²+3x. Find its maximum height and span between ground-level endpoints.
A medicine concentration is C(t)=C₀e^(−kt). If it falls to half after 9 hours, find k and the fraction remaining after 8 hours.
A medicine concentration is C(t)=C₀e^(−kt). If it falls to half after 10 hours, find k and the fraction remaining after 8 hours.
A medicine concentration is C(t)=C₀e^(−kt). If it falls to half after 11 hours, find k and the fraction remaining after 8 hours.
A medicine concentration is C(t)=C₀e^(−kt). If it falls to half after 12 hours, find k and the fraction remaining after 8 hours.
A medicine concentration is C(t)=C₀e^(−kt). If it falls to half after 4 hours, find k and the fraction remaining after 8 hours.
A medicine concentration is C(t)=C₀e^(−kt). If it falls to half after 5 hours, find k and the fraction remaining after 8 hours.
A medicine concentration is C(t)=C₀e^(−kt). If it falls to half after 6 hours, find k and the fraction remaining after 8 hours.
A medicine concentration is C(t)=C₀e^(−kt). If it falls to half after 7 hours, find k and the fraction remaining after 8 hours.
A medicine concentration is C(t)=C₀e^(−kt). If it falls to half after 8 hours, find k and the fraction remaining after 8 hours.
A medicine concentration is C(t)=C₀e^(−kt). If it falls to half after 9 hours, find k and the fraction remaining after 8 hours.
A company compares models M₁= 8x+6 and M₂=8x+11. Find the crossover with a competing model M₃=6x+16 and interpret.
A company compares models M₁= 9x+2 and M₂=9x+7. Find the crossover with a competing model M₃=2x+18 and interpret.
A company compares models M₁= 10x+5 and M₂=10x+10. Find the crossover with a competing model M₃=5x+20 and interpret.
A company compares models M₁= 2x+1 and M₂=2x+6. Find the crossover with a competing model M₃=1x+4 and interpret.
A company compares models M₁= 3x+4 and M₂=3x+9. Find the crossover with a competing model M₃=4x+6 and interpret.
A company compares models M₁= 4x+7 and M₂=4x+12. Find the crossover with a competing model M₃=7x+8 and interpret.
A company compares models M₁= 5x+3 and M₂=5x+8. Find the crossover with a competing model M₃=3x+10 and interpret.
A company compares models M₁= 6x+6 and M₂=6x+11. Find the crossover with a competing model M₃=6x+12 and interpret.
A company compares models M₁= 7x+2 and M₂=7x+7. Find the crossover with a competing model M₃=2x+14 and interpret.
A company compares models M₁= 8x+5 and M₂=8x+10. Find the crossover with a competing model M₃=5x+16 and interpret.
17. Internal assessment: mathematical exploration
Scope: Researchable questions, variables, data, mathematical development, evaluation and reflection. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 17
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. A student investigates whether daily study time predicts quiz score. State variables, a measurable question and one confounding variable.
- Identify the explanatory variable as weekly study time in hours and the response variable as quiz score in percent.
- State a precise population and question, e.g. “Among students in this class, how strongly is weekly study time associated with quiz score?”
- Measure both variables consistently for each student.
- A confounder could be prior attainment or private tutoring, because it may affect both study time and score. Answer: study hours, quiz percentage, and a plausible confounder such as prior attainment.
Worked problem 2. A student measures a pendulum period for lengths 0.20, 0.40, 0.60, 0.80 m. Suggest a linearising transformation if T² is proportional to L.
- The assumed relationship is T²∝L, so write T²=kL for constant k.
- Let the horizontal axis be L and vertical axis be T².
- Plot each measured pair (L,T²).
- The model predicts a straight line through the origin with gradient k. Answer: plot T² against L; the gradient estimates k.
Worked problem 3. A student fits y=a x^b to positive data. Explain how to estimate a and b using logarithms.
- Begin with y=ax^b, where x and y are positive.
- Take natural logarithms: ln y=ln(a x^b).
- Apply log laws: ln y=ln a+b ln x.
- Let Y=ln y and X=ln x; then Y=ln a+bX is linear.
- Regress Y on X: slope gives b and intercept gives ln a, so a=e^(intercept). Answer: estimate b from the slope and a by exponentiating the intercept.
Worked problem 4. An exploration reports R²=0.94 for a quadratic model. Give two further checks before accepting it.
- R²=0.94 indicates that the fitted model explains a high proportion of variation in the sample, but it does not prove the model is appropriate.
- Plot residuals against fitted values or the explanatory variable; look for curvature, changing spread or clusters.
- Check outliers and influential observations.
- Assess whether a quadratic relationship is contextually plausible and avoid unsupported extrapolation. Answer: at minimum, inspect residuals and influential points, and assess contextual validity.
Worked problem 5. A student records 12 trials with a stopwatch. Identify two improvements to reduce random error.
- Stopwatch timing has reaction-time variation, which creates random error.
- Increase the number of repeated trials and calculate a mean, checking for anomalous values.
- Use electronic timing, a light gate or video-frame analysis to reduce human reaction-time effects.
- Keep release position, apparatus and procedure consistent. Answer: repeat and average; use automatic timing while controlling conditions.
Mock questions — 70 questions
An exploration investigates whether stride length predicts running speed. Define a measurable research question, variables, sample plan and a suitable regression analysis.
An exploration investigates whether stride length predicts running speed. Define a measurable research question, variables, sample plan and a suitable regression analysis.
An exploration investigates whether stride length predicts running speed. Define a measurable research question, variables, sample plan and a suitable regression analysis.
An exploration investigates whether stride length predicts running speed. Define a measurable research question, variables, sample plan and a suitable regression analysis.
An exploration investigates whether stride length predicts running speed. Define a measurable research question, variables, sample plan and a suitable regression analysis.
An exploration investigates whether stride length predicts running speed. Define a measurable research question, variables, sample plan and a suitable regression analysis.
An exploration investigates whether stride length predicts running speed. Define a measurable research question, variables, sample plan and a suitable regression analysis.
An exploration investigates whether stride length predicts running speed. Define a measurable research question, variables, sample plan and a suitable regression analysis.
An exploration investigates whether stride length predicts running speed. Define a measurable research question, variables, sample plan and a suitable regression analysis.
An exploration investigates whether stride length predicts running speed. Define a measurable research question, variables, sample plan and a suitable regression analysis.
A student models the cooling of tea. Given readings (0,85), (2,72), (4,62), (6,54), (8,48) in °C, fit an exponential model and evaluate residuals.
A student models the cooling of tea. Given readings (0,85), (2,72), (4,62), (6,54), (8,48) in °C, fit an exponential model and evaluate residuals.
A student models the cooling of tea. Given readings (0,85), (2,72), (4,62), (6,54), (8,48) in °C, fit an exponential model and evaluate residuals.
A student models the cooling of tea. Given readings (0,85), (2,72), (4,62), (6,54), (8,48) in °C, fit an exponential model and evaluate residuals.
A student models the cooling of tea. Given readings (0,85), (2,72), (4,62), (6,54), (8,48) in °C, fit an exponential model and evaluate residuals.
A student models the cooling of tea. Given readings (0,85), (2,72), (4,62), (6,54), (8,48) in °C, fit an exponential model and evaluate residuals.
A student models the cooling of tea. Given readings (0,85), (2,72), (4,62), (6,54), (8,48) in °C, fit an exponential model and evaluate residuals.
A student models the cooling of tea. Given readings (0,85), (2,72), (4,62), (6,54), (8,48) in °C, fit an exponential model and evaluate residuals.
A student models the cooling of tea. Given readings (0,85), (2,72), (4,62), (6,54), (8,48) in °C, fit an exponential model and evaluate residuals.
A student models the cooling of tea. Given readings (0,85), (2,72), (4,62), (6,54), (8,48) in °C, fit an exponential model and evaluate residuals.
For a study of spiral patterns in sunflowers, propose a mathematical method, collectable measurements, assumptions and a way to test model fit.
For a study of spiral patterns in sunflowers, propose a mathematical method, collectable measurements, assumptions and a way to test model fit.
For a study of spiral patterns in sunflowers, propose a mathematical method, collectable measurements, assumptions and a way to test model fit.
For a study of spiral patterns in sunflowers, propose a mathematical method, collectable measurements, assumptions and a way to test model fit.
For a study of spiral patterns in sunflowers, propose a mathematical method, collectable measurements, assumptions and a way to test model fit.
For a study of spiral patterns in sunflowers, propose a mathematical method, collectable measurements, assumptions and a way to test model fit.
For a study of spiral patterns in sunflowers, propose a mathematical method, collectable measurements, assumptions and a way to test model fit.
For a study of spiral patterns in sunflowers, propose a mathematical method, collectable measurements, assumptions and a way to test model fit.
For a study of spiral patterns in sunflowers, propose a mathematical method, collectable measurements, assumptions and a way to test model fit.
For a study of spiral patterns in sunflowers, propose a mathematical method, collectable measurements, assumptions and a way to test model fit.
A student compares two methods of approximating π using measured circles. Identify variables, derive the estimator and discuss uncertainty.
A student compares two methods of approximating π using measured circles. Identify variables, derive the estimator and discuss uncertainty.
A student compares two methods of approximating π using measured circles. Identify variables, derive the estimator and discuss uncertainty.
A student compares two methods of approximating π using measured circles. Identify variables, derive the estimator and discuss uncertainty.
A student compares two methods of approximating π using measured circles. Identify variables, derive the estimator and discuss uncertainty.
A student compares two methods of approximating π using measured circles. Identify variables, derive the estimator and discuss uncertainty.
A student compares two methods of approximating π using measured circles. Identify variables, derive the estimator and discuss uncertainty.
A student compares two methods of approximating π using measured circles. Identify variables, derive the estimator and discuss uncertainty.
A student compares two methods of approximating π using measured circles. Identify variables, derive the estimator and discuss uncertainty.
A student compares two methods of approximating π using measured circles. Identify variables, derive the estimator and discuss uncertainty.
A student investigates optimal packaging for a fixed volume of 500 cm³. Formulate the surface-area objective, constraints and calculus plan.
A student investigates optimal packaging for a fixed volume of 500 cm³. Formulate the surface-area objective, constraints and calculus plan.
A student investigates optimal packaging for a fixed volume of 500 cm³. Formulate the surface-area objective, constraints and calculus plan.
A student investigates optimal packaging for a fixed volume of 500 cm³. Formulate the surface-area objective, constraints and calculus plan.
A student investigates optimal packaging for a fixed volume of 500 cm³. Formulate the surface-area objective, constraints and calculus plan.
A student investigates optimal packaging for a fixed volume of 500 cm³. Formulate the surface-area objective, constraints and calculus plan.
A student investigates optimal packaging for a fixed volume of 500 cm³. Formulate the surface-area objective, constraints and calculus plan.
A student investigates optimal packaging for a fixed volume of 500 cm³. Formulate the surface-area objective, constraints and calculus plan.
A student investigates optimal packaging for a fixed volume of 500 cm³. Formulate the surface-area objective, constraints and calculus plan.
A student investigates optimal packaging for a fixed volume of 500 cm³. Formulate the surface-area objective, constraints and calculus plan.
Design a data-based exploration of commute time versus distance using at least 20 observations. Specify sampling, graph, statistic and limitations.
Design a data-based exploration of commute time versus distance using at least 20 observations. Specify sampling, graph, statistic and limitations.
Design a data-based exploration of commute time versus distance using at least 20 observations. Specify sampling, graph, statistic and limitations.
Design a data-based exploration of commute time versus distance using at least 20 observations. Specify sampling, graph, statistic and limitations.
Design a data-based exploration of commute time versus distance using at least 20 observations. Specify sampling, graph, statistic and limitations.
Design a data-based exploration of commute time versus distance using at least 20 observations. Specify sampling, graph, statistic and limitations.
Design a data-based exploration of commute time versus distance using at least 20 observations. Specify sampling, graph, statistic and limitations.
Design a data-based exploration of commute time versus distance using at least 20 observations. Specify sampling, graph, statistic and limitations.
Design a data-based exploration of commute time versus distance using at least 20 observations. Specify sampling, graph, statistic and limitations.
Design a data-based exploration of commute time versus distance using at least 20 observations. Specify sampling, graph, statistic and limitations.
A student studies the relationship between a basketball shot angle and success distance. Define variables, control conditions and a model that could be tested.
A student studies the relationship between a basketball shot angle and success distance. Define variables, control conditions and a model that could be tested.
A student studies the relationship between a basketball shot angle and success distance. Define variables, control conditions and a model that could be tested.
A student studies the relationship between a basketball shot angle and success distance. Define variables, control conditions and a model that could be tested.
A student studies the relationship between a basketball shot angle and success distance. Define variables, control conditions and a model that could be tested.
A student studies the relationship between a basketball shot angle and success distance. Define variables, control conditions and a model that could be tested.
A student studies the relationship between a basketball shot angle and success distance. Define variables, control conditions and a model that could be tested.
A student studies the relationship between a basketball shot angle and success distance. Define variables, control conditions and a model that could be tested.
A student studies the relationship between a basketball shot angle and success distance. Define variables, control conditions and a model that could be tested.
A student studies the relationship between a basketball shot angle and success distance. Define variables, control conditions and a model that could be tested.
18. Communicating mathematical reasoning and proofs
Scope: Proof, justification, counterexamples, notation, logical structure, interpretation and mathematical writing. Course and level tags identify the intended emphasis; consult the current guide for route-specific depth.
Five fully worked IB-style problems — Chapter 18
Model solutions show calculations, interpretation and mathematical communication.
Worked problem 1. A town model is P(t)=8000(1.025)^t. Find the predicted population after 6 years and comment on rounding.
- Identify P₀=8000, growth factor 1.025 and t=6 years.
- Substitute into P(t)=P₀(1.025)^t: P(6)=8000(1.025)^6.
- Evaluate 1.025^6≈1.1597.
- Multiply: P(6)≈9277 (depending on calculator precision).
- Round to a whole person. Answer: approximately 9,277 people; the estimate is model-dependent.
Worked problem 2. A taxi fare is $4 fixed plus $1.80 per kilometre. Write a model and find fare for 13.5 km.
- Let d be distance in kilometres. The fixed charge is $4 and the distance charge is $1.80 per kilometre.
- Write F(d)=4+1.80d.
- Substitute d=13.5: F=4+1.80(13.5).
- 1.80×13.5=24.30.
- Add the fixed charge. Answer: $28.30.
Worked problem 3. A cylindrical water tank has radius 1.5 m and height 4 m. Find capacity in litres.
- Use cylinder volume V=πr²h.
- Substitute r=1.5 m and h=4 m: V=π(1.5)²(4).
- (1.5)²=2.25, so V=9π≈28.2743 m³.
- Convert cubic metres to litres: 1 m³=1000 L.
- 28.2743×1000≈28,274 L. Answer: approximately 28,274 litres.
Worked problem 4. A linear model predicts sales y=120−3p. Find the price p at which predicted sales become zero and interpret.
- The model is y=120−3p. To find the price where predicted sales are zero, set y=0.
- Solve 0=120−3p.
- 3p=120, so p=40.
- Interpret within the model: at price 40 currency units, predicted sales are zero.
- Check whether this price is within the observed range; if not, the result is extrapolation. Answer: p=40, subject to the model's validity.
Worked problem 5. A model predicts travel time t=0.08d+0.25 hours for distance d km. Find time for 75 km and state one assumption.
- Substitute d=75 into t=0.08d+0.25.
- Distance-dependent time=0.08×75=6.
- Add fixed time 0.25: t=6.25 hours.
- Interpret 0.25 h as 15 minutes, so total is 6 h 15 min.
- One assumption is a constant average travel rate and fixed delay; traffic and stops may vary. Answer: 6.25 hours (6 h 15 min).
Mock questions — 70 questions
Prove that the sum of two consecutive odd integers is divisible by 4 if and only if their average is even, or provide a counterexample and correct the claim.
Prove that the sum of two consecutive odd integers is divisible by 4 if and only if their average is even, or provide a counterexample and correct the claim.
Prove that the sum of two consecutive odd integers is divisible by 4 if and only if their average is even, or provide a counterexample and correct the claim.
Prove that the sum of two consecutive odd integers is divisible by 4 if and only if their average is even, or provide a counterexample and correct the claim.
Prove that the sum of two consecutive odd integers is divisible by 4 if and only if their average is even, or provide a counterexample and correct the claim.
Prove that the sum of two consecutive odd integers is divisible by 4 if and only if their average is even, or provide a counterexample and correct the claim.
Prove that the sum of two consecutive odd integers is divisible by 4 if and only if their average is even, or provide a counterexample and correct the claim.
Prove that the sum of two consecutive odd integers is divisible by 4 if and only if their average is even, or provide a counterexample and correct the claim.
Prove that the sum of two consecutive odd integers is divisible by 4 if and only if their average is even, or provide a counterexample and correct the claim.
Prove that the sum of two consecutive odd integers is divisible by 4 if and only if their average is even, or provide a counterexample and correct the claim.
Prove algebraically that n²+n is even for every integer n, using parity cases.
Prove algebraically that n²+n is even for every integer n, using parity cases.
Prove algebraically that n²+n is even for every integer n, using parity cases.
Prove algebraically that n²+n is even for every integer n, using parity cases.
Prove algebraically that n²+n is even for every integer n, using parity cases.
Prove algebraically that n²+n is even for every integer n, using parity cases.
Prove algebraically that n²+n is even for every integer n, using parity cases.
Prove algebraically that n²+n is even for every integer n, using parity cases.
Prove algebraically that n²+n is even for every integer n, using parity cases.
Prove algebraically that n²+n is even for every integer n, using parity cases.
Show that if a|b and b|c for integers a,b,c with a≠0, then a|c.
Show that if a|b and b|c for integers a,b,c with a≠0, then a|c.
Show that if a|b and b|c for integers a,b,c with a≠0, then a|c.
Show that if a|b and b|c for integers a,b,c with a≠0, then a|c.
Show that if a|b and b|c for integers a,b,c with a≠0, then a|c.
Show that if a|b and b|c for integers a,b,c with a≠0, then a|c.
Show that if a|b and b|c for integers a,b,c with a≠0, then a|c.
Show that if a|b and b|c for integers a,b,c with a≠0, then a|c.
Show that if a|b and b|c for integers a,b,c with a≠0, then a|c.
Show that if a|b and b|c for integers a,b,c with a≠0, then a|c.
Disprove the statement “the square of every real number is greater than the number” by giving a counterexample and explaining it.
Disprove the statement “the square of every real number is greater than the number” by giving a counterexample and explaining it.
Disprove the statement “the square of every real number is greater than the number” by giving a counterexample and explaining it.
Disprove the statement “the square of every real number is greater than the number” by giving a counterexample and explaining it.
Disprove the statement “the square of every real number is greater than the number” by giving a counterexample and explaining it.
Disprove the statement “the square of every real number is greater than the number” by giving a counterexample and explaining it.
Disprove the statement “the square of every real number is greater than the number” by giving a counterexample and explaining it.
Disprove the statement “the square of every real number is greater than the number” by giving a counterexample and explaining it.
Disprove the statement “the square of every real number is greater than the number” by giving a counterexample and explaining it.
Disprove the statement “the square of every real number is greater than the number” by giving a counterexample and explaining it.
Prove that the diagonals of a rectangle are equal using congruent triangles or coordinate geometry.
Prove that the diagonals of a rectangle are equal using congruent triangles or coordinate geometry.
Prove that the diagonals of a rectangle are equal using congruent triangles or coordinate geometry.
Prove that the diagonals of a rectangle are equal using congruent triangles or coordinate geometry.
Prove that the diagonals of a rectangle are equal using congruent triangles or coordinate geometry.
Prove that the diagonals of a rectangle are equal using congruent triangles or coordinate geometry.
Prove that the diagonals of a rectangle are equal using congruent triangles or coordinate geometry.
Prove that the diagonals of a rectangle are equal using congruent triangles or coordinate geometry.
Prove that the diagonals of a rectangle are equal using congruent triangles or coordinate geometry.
Prove that the diagonals of a rectangle are equal using congruent triangles or coordinate geometry.
A student claims √(a+b)=√a+√b for all positive a,b. Test the claim numerically and give a valid counterexample.
A student claims √(a+b)=√a+√b for all positive a,b. Test the claim numerically and give a valid counterexample.
A student claims √(a+b)=√a+√b for all positive a,b. Test the claim numerically and give a valid counterexample.
A student claims √(a+b)=√a+√b for all positive a,b. Test the claim numerically and give a valid counterexample.
A student claims √(a+b)=√a+√b for all positive a,b. Test the claim numerically and give a valid counterexample.
A student claims √(a+b)=√a+√b for all positive a,b. Test the claim numerically and give a valid counterexample.
A student claims √(a+b)=√a+√b for all positive a,b. Test the claim numerically and give a valid counterexample.
A student claims √(a+b)=√a+√b for all positive a,b. Test the claim numerically and give a valid counterexample.
A student claims √(a+b)=√a+√b for all positive a,b. Test the claim numerically and give a valid counterexample.
A student claims √(a+b)=√a+√b for all positive a,b. Test the claim numerically and give a valid counterexample.
Write a complete mathematical argument that the product of three consecutive integers is divisible by 6.
Write a complete mathematical argument that the product of three consecutive integers is divisible by 6.
Write a complete mathematical argument that the product of three consecutive integers is divisible by 6.
Write a complete mathematical argument that the product of three consecutive integers is divisible by 6.
Write a complete mathematical argument that the product of three consecutive integers is divisible by 6.
Write a complete mathematical argument that the product of three consecutive integers is divisible by 6.
Write a complete mathematical argument that the product of three consecutive integers is divisible by 6.
Write a complete mathematical argument that the product of three consecutive integers is divisible by 6.
Write a complete mathematical argument that the product of three consecutive integers is divisible by 6.
Write a complete mathematical argument that the product of three consecutive integers is divisible by 6.