International Curriculum / Pearson Edexcel / Physics
Electricity, charge and circuits | IGCSE Physics Notes & Exam Questions | CBE Nexus
Study electricity, charge and circuits in Pearson Edexcel International GCSE Physics. Read clear online notes, review labelled diagrams and worked examples, then practise chapter exam questions with answers and mark schemes.
Use this lesson to revise the chapter, study its diagrams and worked examples, and test your understanding with marked exam-style questions. Answers can be opened after attempting each question.
8. Electricity, charge and circuits
Electric current is the rate of flow of electric charge. Conventional current is defined as the direction positive charge would flow; in metal wires, electrons drift in the opposite direction.
For an ohmic conductor at constant temperature, current is directly proportional to potential difference. A resistor converts electrical energy mainly into thermal energy.
Series and parallel circuits
- Series: current is the same through every component; supply potential difference is shared between components; total resistance is the sum of resistances.
- Parallel: potential difference is the same across each branch; current divides between branches; total current equals the sum of branch currents.
Worked example
A 12 V supply drives a current of 0.5 A. Resistance = 12 ÷ 0.5 = 24 Ω; power = 12 × 0.5 = 6 W.
Further textbook notes: electric circuits
Charge and current: Current is the rate of flow of charge, I = Q/t. A current of 1 A means 1 C of charge passes a point each second. In a series circuit, current is the same at every point. At a junction, total current entering equals total current leaving.
Potential difference and resistance: Potential difference is energy transferred per unit charge, V = E/Q. Resistance R = V/I. For an ohmic conductor at constant temperature, current is directly proportional to potential difference. A filament lamp is non-ohmic because its temperature and resistance rise as current increases.
Series and parallel: In series, supply potential difference is shared and total resistance is the sum of resistances. In parallel, each branch has the same potential difference; adding branches reduces total resistance. Electrical power can be calculated using P = IV, P = I²R or P = V²/R.
Safety: A fuse melts when current exceeds its rating, breaking the circuit. Earthing provides a low-resistance path for fault current. Never work on live mains circuits.
Check your understanding: Explain why household appliances are connected in parallel and calculate the current through a 6 Ω resistor connected to 9 V.
Worked example, exam-style question and marking guidance
A 3 Ω resistor is connected to a 9 V supply. Calculate current and power.
Show model answer and mark allocation
I=V/R (1); I=9/3=3 A (1); P=VI=9×3=27 W (1).
Examiner’s explanation: Use the potential difference across that resistor. Power is measured in watts.
Exam technique: Show each formula, substitution, calculation and unit. For “explain” questions, connect the scientific idea to the outcome; for “describe” questions, give the relevant sequence or features.
Extra chapter practice question (3 marks)
Two resistors of 4 Ω and 6 Ω are connected in series to a 20 V supply. Calculate the current and state the current through each resistor.
Show answer and mark scheme
Total resistance = 4 + 6 = 10 Ω (1); I = V/R = 20/10 = 2 A (1); series current is 2 A through each resistor (1).