Skip to main content

International Curriculum / Pearson Edexcel / Physics

Physical quantities, units and measurement | IGCSE Physics Notes & Exam Questions | CBE Nexus

Study physical quantities, units and measurement in Pearson Edexcel International GCSE Physics. Read clear online notes, review labelled diagrams and worked examples, then practise chapter exam questions with answers and mark schemes.

Use this lesson to revise the chapter, study its diagrams and worked examples, and test your understanding with marked exam-style questions. Answers can be opened after attempting each question.

1. Physical quantities, units and measurement

Physical quantities and SI units

A physical quantity is a measurable property expressed as a numerical value and a unit. The SI base units commonly used in school physics include metre (m) for length, kilogram (kg) for mass, second (s) for time, ampere (A) for electric current and kelvin (K) for thermodynamic temperature. Derived quantities are formed from base quantities.

QuantityCommon symbolSI unit
Distance / displacements or xmetre (m)
Timetsecond (s)
Speed / velocityvm s⁻¹
Accelerationam s⁻²
ForceFnewton (N)
Energy / workE / Wjoule (J)
PowerPwatt (W)

Accuracy, precision and errors

Accuracy describes closeness to the accepted value; precision describes the closeness of repeated measurements to one another. A systematic error shifts readings consistently, while a random error causes unpredictable variation. Repeat measurements, identify anomalous readings and calculate a mean where appropriate. Record a sensible number of significant figures consistent with the measuring instrument.

Scalars and vectors

A scalar has magnitude only, such as mass, time, energy and speed. A vector has magnitude and direction, such as displacement, velocity, acceleration and force. When adding vectors, directions must be considered; perpendicular components can be combined using Pythagoras’ theorem.

Exam habit: Convert units before substituting. For example, 250 cm = 2.50 m and 3 minutes = 180 s.
Measured length0 cmScale readingRead the scale at eye level to avoid parallax
Key diagram: 1. Physical quantities — simplified labelled illustration for concept explanation.

Further textbook notes: measuring accurately

Choosing an instrument: Use a ruler for ordinary lengths, vernier calipers for small external or internal diameters, and a micrometer screw gauge for very small thicknesses. Before measuring, check the zero reading. If the instrument has a zero error, apply the correction consistently. Read an analogue scale with the eye directly above the mark to reduce parallax.

Uncertainty: For a scale with the smallest division of 1 mm, a single reading is often recorded with an uncertainty of about ±0.5 mm, unless the instrument or question specifies another convention. For a measurement obtained by subtracting two readings, consider the uncertainty in both readings. Repeat measurements help reveal random variation; they do not automatically remove a systematic error.

Derived units: From speed = distance/time, the unit is m/s. From density = mass/volume, the unit is kg/m³. Check dimensions by substituting base units before accepting a formula.

Worked example: A rectangular block is 4.0 cm × 2.0 cm × 1.5 cm and has mass 48 g. Its volume is 12 cm³ and density is 48/12 = 4.0 g cm⁻³. Convert units if the answer is required in kg/m³.

Check your understanding: Explain why repeated readings improve reliability, distinguish accuracy from precision, and state one way to reduce parallax.

Worked example, exam-style question and marking guidance

Worked example: A student measures a metal rod as 12.4 cm. Convert this to metres. 12.4 cm ÷ 100 = 0.124 m. Always convert centimetres to metres before using SI equations.
Exam-style question (2 marks)

A ruler has 1 mm divisions. State one way to reduce parallax and give a suitable uncertainty for one reading.

Show model answer and mark allocation

Read the scale with the eye vertically above the mark (1); uncertainty about ±0.5 mm for a single reading, if the scale division is 1 mm (1).

Examiner’s explanation: Award the method point for eye-level viewing. Accept an appropriate instrument-based uncertainty if justified.

Exam technique: Show each formula, substitution, calculation and unit. For “explain” questions, connect the scientific idea to the outcome; for “describe” questions, give the relevant sequence or features.

Extra chapter practice question (3 marks)

A student walks 120 m in 30 s, then 80 m in 10 s. Calculate the total average speed for the journey.

Show answer and mark scheme

Total distance = 120 + 80 = 200 m (1); total time = 30 + 10 = 40 s (1); average speed = 200 ÷ 40 = 5.0 m/s (1).

← Back to all Pearson Edexcel Physics chapters

Official Education References

Use these official organisations for curriculum guidance, examinations and further learning information.