15 essential photochemistry diagrams with explanations
These labelled figures correspond to the 15 chapter topics. Each illustration includes an accessible title and description, a descriptive caption and structured ImageObject metadata for search engines. The Jablonski figure is expanded to show the main electronic states and competing relaxation pathways.
Figure 25.1: Photon energy and electromagnetic radiation. Spectrum: radio → microwave → infrared → visible → ultraviolet → X-ray → gamma; frequency and photon energy increase as wavelength decreases. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.2: Absorption spectra and Beer–Lambert law. Absorption band with λmax and a cuvette showing incident intensity I₀, transmitted intensity I and optical path l. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.3: Singlet and triplet excited states. Electron spin comparison: singlet electrons are paired with opposite spins; triplet state has parallel spins and three spin substates. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.4: Jablonski diagram and relaxation pathways. Jablonski energy-level map with S₀, S₁, S₂ and T₁ states, vibrational sublevels, absorption, vibrational relaxation, internal conversion, intersystem crossing, fluorescence and phosphorescence. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.5: Fluorescence and Stokes shift. Absorption and fluorescence emission spectra with emission maximum at longer wavelength; labelled Stokes shift. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.6: Phosphorescence and delayed emission. Triplet population through intersystem crossing followed by delayed T₁ to S₀ emission. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.7: Quantum yield and excited-state lifetime. Competing radiative and non-radiative decay channels with rate constants and exponential excited-state decay. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.8: Internal conversion and intersystem crossing. Side-by-side comparison of radiationless S₁→S₀ internal conversion and S₁→T₁ intersystem crossing. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.9: Photochemical primary processes. Excited molecule branching into bond cleavage, isomerisation, electron transfer, hydrogen abstraction and energy transfer. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.10: Photochemical kinetics and actinometry. Irradiation arrangement with calibrated actinometer, reaction vessel and measured incident/transmitted beam. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.11: Photosensitisation and energy transfer. Sensitiser absorbs light and transfers excitation energy to a substrate, returning to its ground state. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.12: Photoredox catalysis. Catalytic cycle: photocatalyst excitation, electron transfer, substrate conversion and photocatalyst regeneration. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.13: Photodegradation and atmospheric photochemistry. Sunlight initiates pollutant photolysis and radical formation, followed by oxygen-mediated atmospheric reactions and secondary products. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.14: Photovoltaics and photoelectrochemistry. Semiconductor absorbs photons, generates electron–hole pairs, separates charge carriers and drives external current or interfacial redox. Original CBE Nexus educational vector illustration; schematic, not experimental data.Figure 25.15: Photochemical safety and experimental design. Shielded UV photoreactor with interlock, controlled beam path, eye protection and measured irradiance. Original CBE Nexus educational vector illustration; schematic, not experimental data.
How to read and explain the Jablonski diagram
A Jablonski diagram is an energy-level map of the electronic states of a molecule and the pathways by which an excited molecule loses energy or emits light. The vertical direction represents energy: higher horizontal lines represent higher electronic energy. The horizontal spacing is used to separate states for clarity; it is not a molecular distance or time axis.
Ground state S₀: Most molecules initially occupy the lowest electronic singlet state, S₀. Several closely spaced vibrational levels exist within each electronic state.
Absorption (upward straight arrow): A photon is absorbed when its energy matches an allowed energy gap. The molecule is promoted rapidly from S₀ to a vibrational level of S₁ or S₂. The Franck–Condon principle explains why the transition is effectively vertical on a nuclear-coordinate diagram: electrons move much faster than nuclei.
Vibrational relaxation (short downward steps within a state): The excited molecule loses excess vibrational energy to its surroundings without changing electronic state. It usually reaches the lowest vibrational level of the excited electronic state before emission.
Internal conversion (IC): A radiationless transition between electronic states of the same spin multiplicity, for example S₂ to S₁ or S₁ to S₀. Electronic energy is converted into vibrational energy and ultimately heat.
Fluorescence (S₁ → S₀): A radiative transition between states of the same spin multiplicity. It is commonly prompt because the singlet excited-state lifetime is relatively short. Since some energy has already been lost by vibrational relaxation, fluorescence often occurs at a longer wavelength than the absorption band.
Intersystem crossing (ISC; S₁ → T₁): A radiationless transition between states of different spin multiplicity. Spin–orbit coupling can mix singlet and triplet character and make this pathway possible.
Phosphorescence (T₁ → S₀): A radiative triplet-to-singlet transition. It is spin-forbidden in the simple spin-selection-rule picture and is therefore often much slower than fluorescence. Emission may continue after the excitation source is switched off.
Competing non-radiative decay: Internal conversion, collisional quenching, energy transfer and chemical reaction can compete with fluorescence and phosphorescence. The observed emission yield depends on the relative rate constants.
Key equations linked to the diagram
Photon energy: E = hν = hc/λ. For parallel first-order excited-state decay channels, the total decay rate is ktotal = kr + knr + kq + … and the lifetime is τ = 1/ktotal. In the simple two-channel fluorescence model, ΦF = kr/(kr + knr). A longer lifetime does not automatically mean a higher fluorescence yield: both radiative and non-radiative rates must be considered.
Common examination mistakes
Do not label internal conversion as emission: it is radiationless.
Do not confuse intersystem crossing with internal conversion: ISC changes spin multiplicity.
Do not say fluorescence is always exactly instantaneous; it has a finite excited-state lifetime.
Do not interpret the diagram's horizontal spacing as a time scale.
Do not assume every excited molecule fluoresces; competing pathways may dominate.
How to draw it in an examination: Draw S₀ and S₁ with several vibrational sublevels, add T₁ to one side, then use a straight upward arrow for absorption, short downward wavy arrows for vibrational relaxation and internal conversion, a downward solid arrow for fluorescence, a crossing dashed arrow for ISC, and a downward arrow from T₁ for phosphorescence. Label each pathway and state whether it is radiative or radiationless.
Figure explanations, laboratory applications and advanced problems
Photochemistry starts with absorption and excited-state formation. Distinguish photophysical relaxation from chemical transformation. Quantum yields must be calculated from photons absorbed, not simply photons incident.
How to interpret it: E=hν=hc/λ. Shorter wavelength means higher energy; one mole of photons carries Nₐhc/λ. Convert wavelength to metres before calculation.
Laboratory connection: Measure lamp wavelength distribution and irradiance at the sample position using calibrated radiometric equipment.
How to interpret it: A=log₁₀(I₀/I)=εlc for suitable dilute, homogeneous solutions. λmax is the absorption maximum; scattering, high concentration and chemical equilibria can cause deviations.
Laboratory connection: Run a solvent blank and dilution series in a matched cuvette; verify absorbance linearity before using ε.
How to interpret it: Multiplicity is 2S+1. Singlet S=0 has multiplicity one; triplet S=1 has three spin substates. Triplets often persist longer because T₁→S₀ emission is spin-forbidden in the simple selection-rule model.
Laboratory connection: Compare prompt and delayed emission; test oxygen quenching with suitable oxygen-controlled samples.
How to interpret it: Energy increases vertically. Absorption promotes S₀→S₁/S₂; vibrational relaxation loses vibrational energy; internal conversion is radiationless within the same multiplicity; ISC changes multiplicity; fluorescence is S₁→S₀ emission; phosphorescence is T₁→S₀ emission.
Laboratory connection: Record absorption, emission and time-resolved lifetime. Compare air-saturated and deoxygenated samples to probe triplet involvement.
How to interpret it: Fluorescence commonly follows vibrational relaxation and solvent reorganisation, so emission is lower in energy and longer in wavelength than absorption. Wavenumber shift is Δν̃=ν̃abs−ν̃em.
Laboratory connection: Collect corrected excitation and emission spectra and control concentration, solvent, slit widths and detector response.
How to interpret it: ISC populates T₁. T₁→S₀ emission is spin-forbidden in the simple model and often delayed; oxygen and molecular motion can quench triplets.
Laboratory connection: Compare emission under air and inert atmosphere using sealed, oxygen-controlled cuvettes.
How to interpret it: For two decay paths, ΦF=kr/(kr+knr) and τ=1/(kr+knr). Additional quenching adds rate constants to the denominator. Quantum yield counts specified events per photon absorbed.
Laboratory connection: Measure lifetime by time-resolved fluorescence and quantum yield against a suitable reference standard.
How to interpret it: Internal conversion conserves spin multiplicity; ISC changes it. Both are radiationless pathways competing with emission and photochemistry.
Laboratory connection: Vary solvent viscosity, temperature or heavy-atom environment one at a time and monitor lifetime and emission yield.
How to interpret it: Excited species may undergo bond homolysis, heterolysis, isomerisation, electron transfer, hydrogen abstraction or energy transfer.
Laboratory connection: Identify products by GC, HPLC or NMR and vary excitation wavelength to determine which absorber initiates the reaction.
How to interpret it: Photochemical rate depends on absorbed photon flux and quantum yield. Actinometry determines photon flux using a reaction of known quantum yield under specified conditions.
Laboratory connection: Record wavelength, irradiated geometry, path length, temperature and volume; do not transfer calibration between geometries without validation.
How to interpret it: A sensitiser absorbs light and transfers excitation energy to an acceptor when energetically and kinetically allowed; the sensitiser may return to its ground state.
Laboratory connection: Use dark, no-sensitiser and no-substrate controls; compare oxygenated and deoxygenated conditions.
How to interpret it: Excitation changes catalyst redox potentials. Oxidative or reductive quenching transfers an electron; later steps must regenerate the photocatalyst and balance charge and electrons.
Laboratory connection: Monitor conversion and selectivity by chromatography or NMR; include dark and no-catalyst controls.
How to interpret it: Photolysis creates excited molecules or radicals. Reactions with O₂, water and other species generate secondary products; wavelength and radical kinetics control fate.
Laboratory connection: Use controlled irradiation and time-resolved product analysis; consider solar spectrum before extrapolating to the atmosphere.
How to interpret it: Absorbed photons generate electron-hole pairs. Efficient devices require charge separation, carrier transport and suppression of recombination; photoelectrochemical systems drive interfacial redox.
Laboratory connection: Measure illuminated and dark current-voltage curves under calibrated irradiance and report active area.
How to interpret it: UV exposure damages eyes and skin. Use wavelength-appropriate shielding, interlocks and controlled beam paths; control temperature, pressure, oxygen and reactive intermediates.
Laboratory connection: Record wavelength, irradiance, distance, geometry, absorbance, temperature and exposure time; follow institutional UV safety procedures.
Additional university-level derivation
Additional derivation: For excited-state population [M*], d[M*]/dt=Rabs−(kr+knr+kq[Q])[M*]. After the light is switched off, [M*]t=[M*]₀e⁻ᵏᵗᵒᵗᵃˡt, so τ=1/ktotal. For dynamic quenching, τ₀/τ=F₀/F=1+KSV[Q], with KSV=kqτ₀.
Advanced numerical exercises with worked answers
Challenge 25.1
Question: A 365 nm source delivers 12.0 mW for 5.00 min. Calculate incident photons in moles.
Worked answer: Energy=0.0120×300=3.60 J. Photon energy=hc/λ=5.44×10⁻¹⁹ J. Moles photons=3.60/(5.44×10⁻¹⁹Nₐ)=1.10×10⁻⁵ mol.
Challenge 25.2
Question: ε=1.50×10⁴ L mol⁻¹ cm⁻¹, l=1.00 cm and c=2.00×10⁻⁵ M. Find A and absorbed fraction.
Worked answer: A=εlc=0.300. T=10⁻⁰·³⁰⁰=0.501. Fraction absorbed=1−T=0.499 or 49.9%.
Challenge 25.3
Question: A fluorophore has τ=4.00 ns and ΦF=0.60. Find kr and knr.
Worked answer: ktotal=1/τ=2.50×10⁸ s⁻¹. kr=Φ/τ=1.50×10⁸ s⁻¹; knr=(1−Φ)/τ=1.00×10⁸ s⁻¹.
Challenge 25.4
Question: F₀/F=2.50 at [Q]=0.0300 M. Find KSV and fraction quenched.
Worked answer: KSV=(2.50−1)/0.0300=50.0 M⁻¹. F/F₀=0.400, so quenched fraction=0.600 or 60.0%.
Calculation discipline: show the governing equation, substitute values with units, retain appropriate significant figures and state the chemical meaning of the result.
Chapter-specific scientific diagram
Original teaching schematic. Axes and relationships are conceptual unless numerical values are explicitly stated in the accompanying worked examples.
Detailed topic-by-topic lecture development
These expanded notes explain the underlying models, equations, assumptions and applications for each topic in the chapter.
Photon energy is E=hν=hc/λ. Shorter wavelengths carry more energy per photon. Molecular absorption requires an allowed transition whose energy matches the photon; selection rules and transition dipole moments govern intensity. UV-visible absorption often excites valence electrons.
Beer–Lambert law A=εlc links absorbance to concentration for a homogeneous, non-scattering sample. Deviations can arise from high concentration, chemical association, stray light, scattering, polychromatic radiation or detector limitations. Use a blank and a validated linear range.
Electronic excitation can create singlet or triplet states. In a singlet state, paired electrons have opposite spins and total spin S=0; a triplet state has S=1 with three spin sublevels. Spin multiplicity influences radiative transition probabilities and lifetimes.
A Jablonski diagram shows absorption, vibrational relaxation, internal conversion, intersystem crossing, fluorescence and phosphorescence. Absorption is usually very fast; vibrational cooling and internal conversion can occur before emission. The diagram is an energy-level map, not a time-scale plot.
Fluorescence is emission from an excited singlet state to a lower singlet state. The emitted photon often has lower energy and longer wavelength than the absorbed photon because of relaxation before emission. The difference is the Stokes shift.
Phosphorescence commonly involves emission from a triplet state to a singlet ground state. The transition is spin-forbidden and can be slow. Oxygen often quenches triplet states; rigid matrices and low temperature can reduce non-radiative pathways and reveal phosphorescence.
Quantum yield is the number of defined events divided by photons absorbed. For simple first-order excited-state decay, τ=1/(kr+knr), and ΦF=kr/(kr+knr). Additional quenching pathways add to the total decay constant and alter both lifetime and emission yield.
Internal conversion is radiationless transition between electronic states of the same spin multiplicity. Intersystem crossing changes multiplicity and is promoted by spin–orbit coupling. Both compete with radiative emission and influence the population of reactive excited states.
Primary photochemical events include bond cleavage, electron transfer, isomerisation, hydrogen abstraction and energy transfer. The excited-state potential-energy surface can differ from the ground-state surface, allowing transformations that are thermally inaccessible or follow different selectivity.
Photochemical rate depends on absorbed photon flux and quantum yield. Incident light is not equivalent to absorbed light because reflection, transmission and scattering matter. Actinometry estimates photon flux; vessel geometry, optical path and changing absorbance should be reported.
A sensitiser absorbs light and transfers energy or an electron to another species. Triplet energy transfer requires favourable excited-state energetics and sufficient electronic coupling. Electron transfer depends on redox potentials, solvent reorganisation and the excited-state lifetime.
Photoredox catalysts absorb visible light to form excited states with altered redox potentials. A catalytic cycle should track catalyst oxidation state and electron balance through quenching, substrate conversion and catalyst regeneration. Oxygen, light penetration and back-electron transfer can affect efficiency.
Environmental photochemistry includes direct photolysis and indirect reactions initiated by sensitised species such as hydroxyl radicals and singlet oxygen. Rates depend on solar spectrum, depth, turbidity, dissolved organic matter and oxygen. Laboratory lamp studies need comparable photon flux and spectral distribution.
Photovoltaic devices convert absorbed photons into separated charge carriers; photoelectrochemical systems couple light absorption to redox reactions at interfaces. Efficient devices require absorption, charge separation, transport, catalytic turnover and stability against corrosion or photodegradation.
UV sources can injure eyes and skin. Use shielding, interlocks and wavelength-appropriate protection. Photochemical reactions may generate reactive intermediates; control oxygen, solvent, temperature and vessel pressure, and record wavelength, irradiance and geometry for reproducibility.
Detailed university-level treatment, derivations and applications
Photochemistry: excited-state kinetics and energy transfer
1. Einstein relation and absorption
A photon carries E=hν=hc/λ. Absorption occurs when the photon energy matches an allowed energy difference and the transition dipole is non-zero. Beer–Lambert law A=εlc applies to a homogeneous, non-scattering sample within the instrument's linear range. Absorbed photon flux, not merely incident power, is needed for quantum-yield calculations.
2. Excited-state rate equation
For an excited state X* that decays by radiative and non-radiative first-order pathways, d[X*]/dt=−(kr+knr)[X*]. Integration gives [X*]t=[X*]0e^(−t/τ), where τ=1/(kr+knr). The fluorescence quantum yield is ΦF=kr/(kr+knr) for this simple model. Additional quenching or energy-transfer pathways add rate constants to the denominator.
3. Stern–Volmer quenching
For dynamic collisional quenching, F0/F=τ0/τ=1+KSV[Q], where KSV=kqτ0. A linear plot is consistent with a simple dynamic model. Static complex formation, heterogeneous environments, inner-filter effects and combined quenching can produce deviations; lifetime measurements help distinguish mechanisms.
4. Energy transfer and photoredox cycles
Triplet energy transfer is favourable when donor excited-state energy exceeds the acceptor triplet energy and orbital/spin constraints permit transfer. In photoredox catalysis, an excited photocatalyst can act as a stronger oxidant or reductant than its ground state. Construct a catalytic cycle by tracking oxidation state, electron balance and catalyst regeneration at every step.
Fully worked numerical exercises
Worked numerical problem 1: Photon energy and molar energy
Problem: Calculate energy for 450 nm light in J photon⁻¹ and kJ mol⁻¹.
Solution: E=hc/λ=4.42×10⁻¹⁹ J photon⁻¹. Multiply by NA: 266 kJ mol⁻¹. This is blue visible light.
Worked numerical problem 2: Beer–Lambert concentration
Problem: A=0.750, ε=2.50×10⁴ L mol⁻¹ cm⁻¹ and l=1.00 cm. Find c.
Worked numerical problem 5: Photochemical quantum yield
Problem: A sample absorbs 2.0×10¹⁸ photons and forms 3.0×10¹⁷ molecules of product. Find Φ.
Solution: Φ=3.0×10¹⁷/2.0×10¹⁸=0.150 molecule per absorbed photon. State whether chain amplification or multiple products per photon are possible.
Worked numerical problem 6: Energy-transfer feasibility
Problem: A donor triplet lies at 1.80 eV and an acceptor triplet at 1.45 eV. Is triplet energy transfer energetically plausible?
Solution: The donor has 0.35 eV more triplet energy, so transfer is energetically downhill by 0.35 eV. Spectral overlap, distance, coupling and spin constraints still determine the rate.
Short-answer revision with model answers
Model answer 1
Question: Distinguish fluorescence from phosphorescence.
Answer: Fluorescence commonly occurs from an excited singlet to a singlet ground state and is prompt. Phosphorescence commonly occurs from a triplet to singlet ground state and is slower because it is spin-forbidden.
Model answer 2
Question: What is the Stokes shift?
Answer: It is the separation between absorption and emission maxima, commonly caused by vibrational relaxation and solvent or structural reorganisation before emission.
Model answer 3
Question: Why must absorbed photon flux be used in quantum-yield calculations?
Answer: Photons that are not absorbed cannot initiate the measured photochemical event. Incident flux overestimates the number of photons available to the molecule.
Model answer 4
Question: How can dynamic and static quenching be distinguished?
Answer: Dynamic quenching reduces excited-state lifetime; pure static quenching reduces emitting population but does not necessarily change the lifetime of the remaining emissive molecules.
Model answer 5
Question: Explain why oxygen often quenches triplet states.
Answer: Molecular oxygen has a triplet ground state and can efficiently accept energy or participate in electron-transfer processes, shortening excited-state lifetimes and sometimes generating reactive oxygen species.
Additional examination questions with explained answers
Model answer 6
Question: Calculate the Stokes shift if absorption maximum is 360 nm and emission maximum is 420 nm.
Answer: In wavelength terms the separation is 60 nm. For a rigorous energy shift, convert each wavelength to wavenumber or energy because energy is proportional to 1/λ.
Model answer 7
Question: Why can a rigid molecular environment increase fluorescence?
Answer: Restricting molecular rotations and vibrations can suppress non-radiative relaxation pathways, increasing the fraction of excited states that decay radiatively.
Model answer 8
Question: What is intersystem crossing?
Answer: It is a radiationless transition between states of different spin multiplicity, commonly singlet to triplet, enabled by spin–orbit coupling.
Model answer 9
Question: Why are actinometers used?
Answer: They are calibrated photochemical systems with known quantum yield, used to determine photon flux reaching a reaction vessel under defined geometry and wavelength conditions.
Model answer 10
Question: How can photoredox catalyst regeneration be verified?
Answer: Track electron balance and oxidation state through the catalytic cycle, and use spectroscopic or electrochemical measurements to detect catalyst intermediates and confirm turnover rather than stoichiometric consumption.
Further study and academic practice
Consult current undergraduate textbooks, peer-reviewed literature and validated laboratory manuals for full derivations and current reference data. Cite external sources and figures. The diagrams on this page are original conceptual teaching aids, not experimental spectra or scale drawings.